PDA

View Full Version : help


Ace
10-03-2006, 04:02 PM
hey, i just got the pilot and i was just wondering what i need to do to break in the bolt, and what parts need to be lubed up to get best preformance.

ross * pilot
10-03-2006, 04:09 PM
first, dissassemble your marker... your bolt, striker, buffer, and back plate with your shim and main spring will come out.... take your bolt and bring the hatch forward back and forth for about an hour... (watch some tv while you do it :D) i did it for a couple days... an hour a day. Also, if you dont want to dissasemble your marker, just put a squeegee down the feed tube, and fire away with co2 or HPA connected.

To answer your second question, you will need to dissasemble your marker.. for a more in depth description go to the "Paintball Bible" ( ottersccustoms.com) there, it will tell you to lube the striker oring, and bolt orings if you have them. there ya go, enjoy your new spyder

Sandman_Bravo
10-03-2006, 04:57 PM
:yeahthat: What he said!

:jump: :wiggle: :poker: :tank:

viseversa2303
10-03-2006, 05:08 PM
Click on Basic Teardown (http://kingman.com/section/support/videos/videos.html)

The link is a video on the basics of how to take apart your marker and which parts to lube up. Go through the videos and check how to do it.

pbfreak3221
10-03-2006, 05:14 PM
Wow, another ace... now we have ace and ace24.

Ace
10-03-2006, 07:10 PM
k, thanks guys

Lexmetal4
10-04-2006, 01:24 PM
Here I'll give you the exact parts you need to lube.
1) all #9 o-rings.
a. 3 of them are located on part #185 (vertical adapter)
b. 1 of them located on part #186 (low pressure chamber)
c. 2 of them located on part #14 (valve body)
That is it for the #9 o-rings.
Next lube (red) o-ring #19A(located on striker bolt)(striker bolt part #JE18A)
Now, Finally, lube up the entire Striker Bolt.--------^

There you go thats all the stuff you need to lube.

Ace
10-04-2006, 03:58 PM
ok sweet thanks. one more thing... how will i know when i've broken the bolt in?

viseversa2303
10-04-2006, 04:17 PM
once you start breaking it in manually which means removing the ACS bolt from your marker and pulling the rod up and down or back and forth then it should be hard at first. I would say do it about 1000 times or for about 30 minutes to an hour and you are set to go.

Ace
10-04-2006, 05:42 PM
what if i dont want to take it apart... i'm a bit sceptical about doing that...

Total90Oliver
10-04-2006, 05:50 PM
its simple..go to www.nicksdistortion.com it has a dissassembly guide

viseversa2303
10-04-2006, 06:15 PM
check out the videos tell you step by step how to take it apart. you need to learn because sooner or later you need to.

Ace
10-04-2006, 06:39 PM
ok, cool, thanks