View Full Version : Cleaning my Eggy 2

10-03-2006, 07:59 AM
I'm not sure where I should post this so I guess I'll do it here.
When I try to clean my Eggy 2 I need to take the lid off. The instructions say to unscrew the phillips screw on the lid but there is nowhere to put a screwdriver. Its just flat.


and on the inside it looks like you can't unscrew it.


how do I get the lid off? Thanks for the help.

10-03-2006, 08:07 AM
You have to pop them out by pushing the inside piece. They are a pain to take in and out and break easily so be careful. When I had to do it I used the handle of a small screwdriver to push on it.

10-03-2006, 11:37 AM
Yeah push it from the inside, you can push it with your finger. Also make sure you put the springs on the door back on right. I put mine in wrong somehow and the lid didnt close then I turned it around and it closed.

10-03-2006, 11:55 AM
I highly recommend cleaning that without taking off the lid......
A swab maybe....

10-03-2006, 11:59 AM
I take mine off all the time.

It is a retaining clip.

Use a knife with a small flat blade and slide it under the lip of the top. Then pry it up slowly and you will be able to slide the whole thing right out.