PDA

View Full Version : 32 degrees spring kit


bracer028
09-25-2006, 04:44 PM
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ih=016&item=260033046203&rd=1&sspagename=STRK%3AMEWN%3AIT&rd=1

i just purchased this, how come there are so many springs?

i understand the long ones and that goes into the valve, where do all the short ones go?

vwjimmy
09-25-2006, 04:54 PM
The long ones go in the back of the marker...they are 'main' or 'striker' springs....
The short ones are 'valve' or 'valve pin' springs, they go just behind the v/a and there are two different lenghts to accomidate the different types of valve springs in use....

killer48
09-25-2006, 04:54 PM
long ones are for the striker, short ones are for the valve. I think theres a trigger spriing in there to. I'm ordering a 32* spring kit, new design valve, and a dragonfly striker today!:D

bracer028
09-25-2006, 04:55 PM
The long ones go in the back of the marker...they are 'main' or 'striker' springs....
The short ones are 'valve' or 'valve pin' springs, they go just behind the v/a and there are two different lenghts to accomidate the different types of valve springs in use....

what is the v/a?

thanks

killer48
09-25-2006, 04:55 PM
o man you beat me to it.

whats the va?
what you foregrip is screwed into

bracer028
09-25-2006, 04:57 PM
what you foregrip is screwed into

i don't understand.

so wait

i put the long one in the main valve, the short one goes where? i can't find another place that takes springs

vwjimmy
09-25-2006, 04:58 PM
the v/a is the 'V'ertical 'A'dapter...
it is the block at the front of the lower tube that the expansion chamber, regulator or just the air line goes into.....
it is held on by a screw underneath the body just in front of the trigger frame...

bracer028
09-25-2006, 04:59 PM
so its that tube thingy that is under the barrel?

i don't see any springs in htere

killer48
09-25-2006, 05:00 PM
long one goes behind the striker, thats towards the back under the bolt. the short one goes towards the front of the marker, in the bottom tube, in front of the valve.

bracer028
09-25-2006, 05:01 PM
thanks

what about the medium ones then?

vwjimmy
09-25-2006, 05:01 PM
Unless you are changing the valve or converting to low pressure....
you can leave the stock valve spring in anyway....

bracer028
09-25-2006, 05:02 PM
oh ok cool thanks

so i'll just change the striker spring thnks

Hob Hayward
09-25-2006, 05:18 PM
The medium length springs are for the oldschool spyder valves.