Another MR2 e- trigger problem.

[mortimer]

So here is the scoop. Saturday morning trigger worked fine. I plugged it in to recharge the battery like I allways do. Saturday night unplugged battery cleaned the marker and used a q-tip to remove old paint around trigger frame. I used a dry q-tip to clean it too. Then put it all back togeather, test the trigger and nothing. Switched battery with other kingman battery and no go. Checked all connections too, all were good. Any ideas?:(

[DRAGON]

No lights no nothing at all? Try a regular 9v to see if it's the circuitry or battery -

[mortimer]

I tried that also and no go. The only thing I can think of that caused the problem was that the trigger was on when I plugged it in, but I pretty sure that it was off.