View Full Version : E-cocker help please

Shocker Guy
09-02-2006, 12:23 PM
I have an all stock e-orracle. My probelm is it will not re-cock. I've have just now changed out the front reg and checked the pressure on my vert reg. I'm wainting for the thread locker to dry. If this doesn't work does any one have any other ideas?


Recon by Fire
09-02-2006, 06:01 PM
Have you timed it?

09-02-2006, 06:30 PM
the ram doesnt move at all? or does the back block move but not catch the sear?

Shocker Guy
09-04-2006, 09:10 AM
everything moves fine when I push the button on the 3-way. I put it back to factory fast. I'm starting to think it might be a board or wire problem. When I pull the trigger the sear lets go, it fires, but then it doesn't re-cock. It looks like the 3-way is not being activated at all. good new battery is in the frame so I know it isn't that.

09-04-2006, 06:41 PM
Yea check all the connections.... also make sure you dont have the Pheus tubes backwards on the 3 way....

09-04-2006, 08:30 PM
How far do you have your IVG Threaded in? You should have it only 1 or 2 threads in for less kick, turn up your hpr to compensate

Shocker Guy
09-04-2006, 11:30 PM
the hoses are right. didn't think about the IVG will try that tomorrow. And I'll be calling worr tech support.