PDA

View Full Version : double fires 1ce in a while spyder pilot acs


xxxalpinexxx80
08-30-2006, 09:29 AM
this is a brand new gun. i walk the trigger alot with out co2. 1ce n a while casually it will double shoot with 1 trigger pull.

can some 1 plz help me

Baozer
08-30-2006, 11:49 AM
i think its caused by bounce... [i heard buying a new board will fix that]

vwjimmy
08-30-2006, 12:41 PM
It probably is 'bounce'. The cure would be trigger adjustment. Did you adjust the trigger? If it is really touchy, backing it off a bit might help. Pilots kick alot and just that might cause two touches......

xxxalpinexxx80
08-30-2006, 03:25 PM
yes my trigger is really close to it 1 lil tap it will fire. thank you

ooglieboogliebob
08-30-2006, 04:11 PM
or you could do a magnet mod on your spyder to fix it

http://www.ottersccustoms.com/magtrig.html

xxxalpinexxx80
08-30-2006, 06:28 PM
wat would a magnet mod do n will it be lighter pull or what

bamf-hacker
08-30-2006, 06:34 PM
It would force the trigger to return away from the switch.. Less likely to get bounce if the trigger is being forced to the starting position.

splaturout
08-30-2006, 06:44 PM
i did that mod and I still get bounce. I had to back the trigger off a bit to help stop it.

spyderpaintball
08-30-2006, 07:18 PM
While magnets sometimes help. The only sure fire way to stop bounce is trigger adjustment. All you need to do is back the trigger off the microswitch a tad and the bounce will disappear.