PDA

View Full Version : torpedo reg issues...


big_daddy_d
08-28-2006, 09:13 AM
ok had a torpedo reg with VP delrin pistons on my ion, after a few hours of play last weekend i noticed my pressure was constantly creeping up and when it hit above 200 psi going into the gun obviously the noid would vent. took everything apart and cleaned and lubed and all that and the torp is still acting up, right now have an older style maxflo off of an impulse as my vertical reg and pressure is holding up fine. Is the torp shot or is there a chance of rebuilding it? Any ideas?

Drefish99
08-28-2006, 09:41 AM
Try and open up the other end of the piston (the side that goes into the gun). It is prob. a dirty reg seat or need lube on the orings on the reg pin.