PDA

View Full Version : The Official Spyder Appraisal Thread! See how much your gun is worth here.


Jimmyd24
08-12-2006, 08:45 PM
Well we use to have one of these but I can't find it anymore and I just did a search for "Spyder Appraisal Thread" and nothing came up so I figured I would make another one since the other seemed pretty popular. Anyway, this thread is very simple as long as no idiots mess it up. Heres how it goes:

1. You post the setup of your gun.
2. Other members of the forums come in and tell you how much you would get if you sold it.
3. Some members are higher than others so don't go crazy. I, for instance, usually tell you how much you would get on ebay. Clown on the other hand use to do it to where it would be how much you would get from someone who knows what they are talking about lol. Just don't flip out on any of the estimators, you asked us to do it.
4. ANYONE can help appraise the guns, no matter how much you know or don't know but don't make stupid estimates because it will anger others.
5. Please be sure to post your setup in the post and do not say "look at my sig." Often times, people like to be able to quote it so they can look at it while appraising.
6. Please do not post your gun repeatedly hoping to get a better appraisal unless the first one you got was just that horrible. Please only repost your setup if you added something to it.

I think that pretty much covers it. Let the fun begin.

stylinbeaver
08-12-2006, 10:55 PM
Sky Blue Pilot
25 gram switch
Dye Boomstick
Halo TSA
PMI 48/30

thechubbss12
08-13-2006, 05:25 AM
Humm overall Pilot is worth about $145 with hopper and tank...

If you part it though

Pilot (stock) $90
25g $5
Boomstick $45
TSA $15
48/3000 $40

stylinbeaver
08-13-2006, 05:47 AM
^^^Thanks chubbs. That's more than I was expecting.

Jimmyd24
08-13-2006, 07:24 AM
Black Spyder Rodeo
Shockteck Superfly Bolt
Aim Shock Regulator
CCM Clamping Feedneck
Kingman Rocking Trigger
Check It 15* Assault Block
20in Progressive Barrel

Ace24
08-13-2006, 07:48 AM
Custom Painted '03 Spyder Fenix
The One Kit
J4J Ceramic 14"
CP Shorty Reg
Z-Eggy

PBBUM892
08-13-2006, 08:35 AM
Blue Black Fade 05 Spyder Pilot ACS
50g microswitch
T-board with eyes
t-chip multi-mode
Drilled and tapped for eyes
Timmy eye covers
Check It Slip On Feedneck
Dye Stickies
15degree assault block w/ torpedo reg.
Check it unimount
SP Progressive 12inch barrel

vwjimmy
08-13-2006, 01:24 PM
Jimmy, Ace, and PBBUM.....
These markers are worthless....
pm me for my addy and you can send them to me for disposal!!!! :D :D

thechubbss12
08-13-2006, 01:45 PM
Black Spyder Rodeo (As a whole $150) (Stock $60)
Shockteck Superfly Bolt $20
Aim Shock Regulator $35
CCM Clamping Feedneck $15
Kingman Rocking Trigger $60-75
Check It 15* Assault Block $25 W/ gage $20 W/O
20in Progressive Barrel $15

Custom Painted '03 Spyder Fenix (Whole $175)
The One Kit $80
J4J Ceramic 14" $15
CP Shorty Reg $35-50
Z-Eggy $55

Blue Black Fade 05 Spyder Pilot ACS (Whole $225) (Stock $85)
50g microswitch $5
T-board with eyes $35-40
t-chip multi-mode $15
Drilled and tapped for eyes (Body worth $25 W cover)
Timmy eye covers (Depends on Brand $15-30)
Check It Slip On Feedneck $5
Dye Stickies $15
15degree assault block $25 W/ gage $20 W/O
torpedo reg. $35
Check it unimount $20
SP Progressive 12inch barrel $15

Most of these prices are about the best you will get in resale for the best of quality stuff.. price would need to be lowerd for the more blemishes it has....

Hossy
08-13-2006, 01:55 PM
chubbs ftw

vwjimmy
08-13-2006, 03:04 PM
the chubbss ftw
:yeahthat:

Ace24
08-13-2006, 03:20 PM
:yeahthat:

Wow my gun will be worth quite a bit when I am done with it huh Sidney?

camo911
08-13-2006, 03:23 PM
'05 Imagine body w/eyes
T-board
flame eye covers
delrin supafly bolt
50g microswitch
Blade trigger
Dye stickie 3's
Bob long gauge
15* assault block w/ pure energy regulator
DOP bullet drop w/on-off
72/3000 tank(its huge!)
Eggy(soon to be Vlocity)

thechubbss12
08-13-2006, 07:17 PM
Yea i do know my stuff.... But im not perfect.... I just wish i was LOL...

'05 Imagine body w/eyes (idd give you $300 for everything listed here ) (Stock $60)
T-board $35 W/eyes $40
flame eye covers $15
delrin supafly bolt $20
50g microswitch $5
Blade trigger $5? any brand?
Dye stickie 3's $15
Bob long gauge $8-10
15* assault block $25
pure energy regulator $20
DOP bullet drop w/on-off $10-15 (never sold one of these before....)
72/3000 tank(its huge!) $60
Eggy(soon to be Vlocity) $40-45

camo911
08-13-2006, 07:29 PM
That blade trigger just came off a pilot, but it works great for me, and at $3 the price was right! Thanks Chubbs, thats way more than i expected it to be worth:D

Nenkitsune
08-13-2006, 10:13 PM
hmmm i doubt mine would be worth much so here we go
E-99 avant with drilled va and polished internals
Empire 16in barrel
Qloader 200 pack
Top cock acs modded to rear
Standard kingman reg
Sweetspot trigger
Modded valvepin and valve
32* spring kit

vwjimmy
08-14-2006, 04:33 AM
Props to thechubbss12......
the appraisal pimp!!!!

bamf-hacker
08-14-2006, 04:39 AM
Good idea for a thread...

and I see a new Sig quote for Chubbs soon :)

Props to thechubbss12......
the appraisal pimp!!!!

thechubbss12
08-14-2006, 07:08 AM
LOL bamf i think you are on to something.... Might just have to make the change today. =)

Whole marker $70 Minus Q-loader....
E-99 avant with drilled va and polished internals $25
Empire 16in barrel $20
Qloader 200 pack (Someone has stumped me here.... never seen a q-loader in person much less sold one....)
Top cock acs modded to rear $10 (Its tricky if you could remove the rear cocking and still use it for top cocking then it would be a more universal bolt and be worth more... But if it was a uglyish job and doesnt do top cocking anymore then it would be worth 10 bucks... )
Standard kingman reg $10
Sweetspot trigger $10
Modded valvepin and valve $10
32* spring kit $6

Nenkitsune
08-14-2006, 07:14 AM
it still goes top cock. the rod i used is threaded the same as the original burr, so you just put the ball, spring and screw back in, and it's back to top cock. i kept those little bits too....i think XP
the 200 package for the laoder retails for 80. i'd guess anywhere from 40-50/60 would seem about right

shunut
08-14-2006, 10:23 AM
I thought I'd put this up just to see what you guys said. I know technically it does not function like a spyder anymore but still has a Spyder body. Let me know what you think.

http://i51.photobucket.com/albums/f395/shunut/Spimmy/spimmy12.jpg

TLX Body
Unmilled PBKingdom 2k2 Eye Covers
2k2 Clamshell
inside the clamshell
Frenzy 127.4 Board
Solenoid
12 and 14 pt wiring harnesses
LCD
Trinity Eyes (allow for 20* of misalignment and they still work, semi inside the frame)
Hybrid 06 Wrap Around Lady Grips
Alias Trigger Gaurd
CP Sling Blade Roller Trigger w/ Magnetic Return
Shocktech Superfly Bolt
AIM Ram Sleeve
CP Adjustable Ram Cap
2k2 Ram
2k2 Poppet
2k2 Front Block w/ BL Gauge
2k2 LPR
CP Shorty Reg w/ BL Gauge
SP S-Rail
NDZ Pro-Lock Feedneck
Freak Back
Freak Front
Anodized by FBM
Custom Milling, um, Dremeling by shunut

stylinbeaver
08-14-2006, 11:00 AM
I thought I'd put this up just to see what you guys said. I know technically it does not function like a spyder anymore but still has a Spyder body. Let me know what you think.

http://i51.photobucket.com/albums/f395/shunut/Spimmy/spimmy12.jpg

TLX Body
Unmilled PBKingdom 2k2 Eye Covers
2k2 Clamshell
inside the clamshell
Frenzy 127.4 Board
Solenoid
12 and 14 pt wiring harnesses
LCD
Trinity Eyes (allow for 20* of misalignment and they still work, semi inside the frame)
Hybrid 06 Wrap Around Lady Grips
Alias Trigger Gaurd
CP Sling Blade Roller Trigger w/ Magnetic Return
Shocktech Superfly Bolt
AIM Ram Sleeve
CP Adjustable Ram Cap
2k2 Ram
2k2 Poppet
2k2 Front Block w/ BL Gauge
2k2 LPR
CP Shorty Reg w/ BL Gauge
SP S-Rail
NDZ Pro-Lock Feedneck
Freak Back
Freak Front
Anodized by FBM
Custom Milling, um, Dremeling by shunut


Shunut's Spimmy--- Priceless

splaturout
08-14-2006, 11:01 AM
Maybe you could trade it for some of that "Magic Dust" Dragon is selling?

Sandman_Bravo
08-14-2006, 01:33 PM
Shunut's gun is going to go down in spyderforums history as "that marker" that all the other project guns are compared to; props to him.

As for mine:

J&J S2 ceramic Barrel
Sundragon (CCM) locking feedneck
Polished internals
32* spring kit & Trinity spring kit (32* light valve,Trinity hard main)
Dark Horizon titanium hammer
Bandit Bolts delrin LP bolt w/o-rings
Bandit Bolts hi-flo valve
ND valve pin
Alamo Paintball hi-flo valve cup seal
Empire regulator
Dye pressure gauge
Check-it 15* Assault Block vertical adapter
Shocktech mini drop forward
CP ASA/on-off
Shocktech metric to NPT adapter
Kila magnetic ball detents
Sundragon Paintball 50 gram spli-switch
Sundragon Paintball magno-trigger
Dye sticky 3 grips

with: Empire Re-loader 2
Crossfire 68/4500 N2 tank

thechubbss12
08-14-2006, 01:47 PM
Josh i would have to say you would have a major problem parting this... People dont want pre 2k4 stuff =(...


Id give you $700 for everything pictured here...
TLX Body $50 (mad custom skills....)
Unmilled PBKingdom 2k2 Eye Covers $20
2k2 Clamshell $50
Frenzy 127.4 Board $50
Solenoid $40
12 and 14 pt wiring harnesses $10
LCD $8
Trinity Eyes (allow for 20* of misalignment and they still work, semi inside the frame) $10
Hybrid 06 Wrap Around Lady Grips $15
Alias Trigger Gaurd $15?.... i dunno
CP Sling Blade Roller Trigger w/ Magnetic Return $20
Shocktech Superfly Bolt $35
AIM Ram Sleeve $30
CP Adjustable Ram Cap $15
2k2 Ram $10
2k2 Poppet $5
2k2 Front Block w/ BL Gauge $20
2k2 LPR $20
CP Shorty Reg w/ BL Gauge $50
SP S-Rail $15
NDZ Pro-Lock Feedneck $15
Freak Back $100 (for back and inset kit)
Freak Front
Anodized by FBM FTW
Custom Milling, um, Dremeling by shunut FTW

Wow now this is a upped spyder.... Whole id give you $300
J&J S2 ceramic Barrel $15
Trinity locking feedneck $15
Polished internals $8
32* spring kit & Trinity spring kit (32* light valve,Trinity hard main) $10 together
Dark Horizon titanium hammer $25-30
Bandit Bolts delrin LP bolt w/o-rings $20
Bandit Bolts hi-flo valve $20
ND valve pin $8
Alamo Paintball hi-flo valve cup seal $5....?
Empire regulator (Same as CP) $30-40
Dye pressure gauge $8
Check-it 15* Assault Block vertical adapter $25
Shocktech mini drop forward $15
CP ASA/on-off $15
Shocktech metric to NPT adapter $3
Kila magnetic ball detents $15
Sundragon Paintball 50 gram spli-switch $5
Sundragon Paintball magno-trigger $15
Dye sticky 3 grips $15

My estimates may be off on the timmy stuff cause it is mad custom stuff.....

Ace24
08-14-2006, 02:25 PM
I thought I'd put this up just to see what you guys said. I know technically it does not function like a spyder anymore but still has a Spyder body. Let me know what you think.

http://i51.photobucket.com/albums/f395/shunut/Spimmy/spimmy12.jpg

TLX Body
Unmilled PBKingdom 2k2 Eye Covers
2k2 Clamshell
inside the clamshell
Frenzy 127.4 Board
Solenoid
12 and 14 pt wiring harnesses
LCD
Trinity Eyes (allow for 20* of misalignment and they still work, semi inside the frame)
Hybrid 06 Wrap Around Lady Grips
Alias Trigger Gaurd
CP Sling Blade Roller Trigger w/ Magnetic Return
Shocktech Superfly Bolt
AIM Ram Sleeve
CP Adjustable Ram Cap
2k2 Ram
2k2 Poppet
2k2 Front Block w/ BL Gauge
2k2 LPR
CP Shorty Reg w/ BL Gauge
SP S-Rail
NDZ Pro-Lock Feedneck
Freak Back
Freak Front
Anodized by FBM
Custom Milling, um, Dremeling by shunut
If you ever sell that gun I will personally go out to where you live and slap the **** out of you. Although it would be cool to know how much that gun would go for... and with an anno job like that it would sell VERY fast.

Oh and another thing, I showed that to some of the guys at the Proshop/field where I work and one guy said there was no way you did that. He was so impressed with it lol. He thought it was just a really nice Timmy, then I showed him your before and after shots. He couldnt believe it and said that if he ever needs a custom milling job done, hes sending it to you.

Hossy
08-14-2006, 03:00 PM
If you ever sell that gun I will personally go out to where you live and slap the **** out of you. Although it would be cool to know how much that gun would go for... and with an anno job like that it would sell VERY fast.

Oh and another thing, I showed that to some of the guys at the Proshop/field where I work and one guy said there was no way you did that. He was so impressed with it lol. He thought it was just a really nice Timmy, then I showed him your before and after shots. He couldnt believe it and said that if he ever needs a custom milling job done, hes sending it to you.

i think he is gonna sell it ace

Ace24
08-14-2006, 03:06 PM
i think he is gonna sell it ace
sdhksdahfkdshffhhdaskjfhdasfkh:dodgy:

Why would you put all that hard work into a gun, make it as unique as he has, then sell it. I cant do that lol. When I get done with this Fenix project I have, I'm never selling it. I put my heart and soul into whatever I fix/rebuild/build from scratch. (I am a gear head/auto mechanic/photographer/artist and an emotional one at that)

vwjimmy
08-14-2006, 03:17 PM
I understand where you are comming from Ace but sometimes the reward for the builder ends when there is no more to do....
Upgrade, upgrade and then *POOF* nothing left to do....
Sometimes moving on to another challenge is the best we can do, sometimes it is all we can do, and shunut has many more ahead of him...no doubt we will be seeing more creations from him......
Personally, I am counting on it......
Now, back on track: Appraisal

Ace24
08-14-2006, 03:21 PM
Wait, wait, wait, gotta get off topic again. Lol. I know what yoru saying Jimmy. Personally, I am going to make an MR1 a project next after I finish the Fenix project. Haha. *Mechanic at heart always has to tinker :) *

I think you saw what I wanted to do? Were yo uthe one who was excited and curious to know what it was going to look like with that M4 Barrel shroud, offset red dot sight, *somewebsite has a feedneck upgrade for it*, and some other mods I would make?

ANYWAY! Now, its back on topic. :D

shunut
08-14-2006, 03:25 PM
Well since I'm the person let me explain it for my point of view. Yes, its sick, it looks awesome and shots just as good. I'm surprised how well it came out and the reactions I've received. Why am I going to sell it? I can't use it, I built it to play with, not to sit and collect dust. I can't play anymore so I want to share it with the Paintball world. I've put lots of time and money into it but its like buying a Ferrari and never driving it, whats the point? You see what I'm saying? It was a fun build, its an awesome gun and since I can't use it why not make somebody else happy?

Sorry this hijacked the thread. If you want to talk to me more about it catch me on AIM, pm me or start another thread.

vikingshadow
08-14-2006, 04:12 PM
Ok, here's a basic rule of thumb I go buy in regards to Spyders and clones. Take the price of everything you have in your gun, including the gun itself. Now, multiply it by 60%, drop it another 50.00 and that's the price you can MAYBE start negotiating from. You have to understand, resale for spyders, no matter the upgrades, is really bad.

Now, in Shunut's case, you've got a heavily milled gun with some time and effort put into it. The upgrades change the operation of the gun completely. If you didn't tell anyone what it was, they'd never know. You could get a used timmy price out of that one, and maybe a bit more, for sure.

Ace24
08-14-2006, 04:43 PM
Where have I read this before...? Havent you said that once or twice before? Or was that my brother... *so confused* I think I need more cold medicine, the coughing is hurting my brain.

vikingshadow
08-14-2006, 04:58 PM
I said it before, and I'll probably say it again. :D Just about everytime a thread like this pops up, actually.

vwjimmy
08-14-2006, 05:03 PM
I still say this thread is fun for all.....
Its not like a B/S/T.....just an idea of what others value your marker at....
:up:

Jimmyd24
08-17-2006, 01:36 PM
dont let this thread die

calebh
08-21-2006, 07:48 PM
ok, this one probly ranks high on the ghettoest (and cheapest) spyders list. this is the one i was working on and never bothered to finish cuz i bought my mag. and who needs a half upgraded spyder when youve got a mag? its not like i need the backup marker... at least i havent yet. its fully functional. or was, anyway. i havent even aired it up in forever. after being gone for so long from paintball, im more interested in my mag. anyway, im thinking of scrapping the lp spyder project and turning it into a spimmy. i just want to see what this is worth

spyder xtra
lp valve picked out of the "tony box"
deventuried stock bolt
spring kit put together from various kits found in the "frank box"
stock cocker reg (last i checked, it was pretty permanently in the asa... has large scratches from monkey wrenches now)
trigger frame has enamel sanded off of it, and the metal underneath was polished with steel wool.
and im thinking thats about it...

btw, frank and tony are two guys in my area who are really big into paintball, and theyve spent more time fixing markers and collecting random parts than ive probly been alive.

thechubbss12
08-22-2006, 03:48 AM
spyder xtra Whole... about 35 bucks
lp valve picked out of the "tony box" $5
deventuried stock bolt $6
spring kit put together from various kits found in the "frank box" $5
stock cocker reg (last i checked, it was pretty permanently in the asa... has large scratches from monkey wrenches now) $8?
trigger frame has enamel sanded off of it, and the metal underneath was polished with steel wool. $15

Yea id have to say you get the least spent on upping a spyder award... LOL

calebh
08-22-2006, 02:22 PM
Yea id have to say you get the least spent on upping a spyder award... LOL

lol heck yes :D

el jefe561
09-03-2006, 07:38 PM
how much is a electra dx worth the only upgrade i got on it is a blade trigger

el jefe561
09-03-2006, 08:15 PM
spyder electra dx
blade trigger
viewloader quantam loader

thechubbss12
09-04-2006, 06:34 AM
spyder electra dx Whole $50
blade trigger $8
viewloader quantam loader $10

BlackHawk
09-04-2006, 07:11 AM
Highly Modified markers = $50.00
Slightly Modified markers = $25.00
Stock markers just go shot it and leave it alone = Priceless

el jefe561
09-06-2006, 04:57 PM
how much r espirits and flashes worth

killerpinecone
09-06-2006, 05:06 PM
Rodeo
Camd e-frame
ndz valve
acs bolt
dye stickys
eggy2
sp teardrop

Jimmyd24
09-06-2006, 05:11 PM
165

pray and spray
09-07-2006, 12:45 PM
Spyder TL-X 32 degrees spring, camd e trigger check it sweetspot trigger, halo b, and only seen field action twice once with paint, the other with re-balls (makes chopping obsolete, or at least the cleaning of the barrel after a chop)...lol yes i'm new to the sport

Jimmyd24
09-07-2006, 01:17 PM
with halo b 160ish

Jimmyd24
09-07-2006, 01:18 PM
remember, things are worht only as much as someone will pay for it

conradl
09-07-2006, 01:36 PM
What do you guysthink this is worth it has only been used 3 times and is in perfect condition

Black 2005 imagine led
lapco low rise feed neck
Dye stickies 3
smart parts tear drop
empire reloader 2
polished internals
custom milling/paint job
20 oz CO2

thank you

tCLiSEm
11-10-2006, 08:28 AM
Estimation of how much my spyder AND the TANK+HOPPERs are worth? :eek:
Here is everything

Custom Products Direct Mount On/Off ASA - Red
Custom Products Regulator w/Gauge Port - Short - Red
Dye Spyder Sticky 3 Paintball Grip - Red
Kingman Rechargeable 9.6v Battery (x3)
Kingman Spyder Delrin ACS Bolt
Kingman Spyder Imagine LED 05' - Black
New Designz Halo Over Drive Pulley
New Designz Spyder HP Valve
New Designz Spyder Clamping Lock Feed Neck - no holes - Red
Odyssey Halo Backman LCD TSA Paintball Loader - Black
Odyssey Halo Belt Driven w/Rip Drive Loader - Red
Off-Set mount
PMI Pure Energy N2 Tank - 48ci 3000psi
Scenario Dreams Bouncebeam Eyes
Scenario Dreams Breakbeam Eyes
Scenario Dreams Spyder T-Board
Scenario Dreams Spyder T-Switch .50g
Shocktech Spyder Striker Spring Set
Smart Parts All-American Pre-06 Barrel Front - 16 Inch - Red
Smart Parts All-American Pre-06 Spyder Back
Smart Parts Freak 06 Barrel Front - 14 Inch - Red Polished
XSF Advantage Spyder Eye Cover - Silver
It's drilled for bounce & breakbeam eyes + Eye wireing


Old Photo, I removed all my stickers.
Not shown XSF Eye Covers
http://img117.imageshack.us/img117/2210/dscf00037yg.th.jpg (http://img117.imageshack.us/my.php?image=dscf00037yg.jpg)

Thanks
-Tim

blue_blank
11-10-2006, 10:56 AM
http://img467.imageshack.us/img467/1864/imag0046nk6.jpg

i just want to know how much the gun is only

spyder rodeo
spyder esp frame with dye 3 grip
stock barrel

Jimmyd24
11-10-2006, 11:18 AM
135 for the rodeo

kidonfire
11-10-2006, 11:32 AM
Estimation of how much my spyder AND the TANK+HOPPERs are worth? :eek:
Here is everything

Custom Products Direct Mount On/Off ASA - Red
Custom Products Regulator w/Gauge Port - Short - Red
Dye Spyder Sticky 3 Paintball Grip - Red
Kingman Rechargeable 9.6v Battery (x3)
Kingman Spyder Delrin ACS Bolt
Kingman Spyder Imagine LED 05' - Black
New Designz Halo Over Drive Pulley
New Designz Spyder HP Valve
New Designz Spyder Clamping Lock Feed Neck - no holes - Red
Odyssey Halo Backman LCD TSA Paintball Loader - Black
Odyssey Halo Belt Driven w/Rip Drive Loader - Red
Off-Set mount
PMI Pure Energy N2 Tank - 48ci 3000psi
Scenario Dreams Bouncebeam Eyes
Scenario Dreams Breakbeam Eyes
Scenario Dreams Spyder T-Board
Scenario Dreams Spyder T-Switch .50g
Shocktech Spyder Striker Spring Set
Smart Parts All-American Pre-06 Barrel Front - 16 Inch - Red
Smart Parts All-American Pre-06 Spyder Back
Smart Parts Freak 06 Barrel Front - 14 Inch - Red Polished
XSF Advantage Spyder Eye Cover - Silver
It's drilled for bounce & breakbeam eyes + Eye wireing


Old Photo, I removed all my stickers.
Not shown XSF Eye Covers
http://img117.imageshack.us/img117/2210/dscf00037yg.th.jpg (http://img117.imageshack.us/my.php?image=dscf00037yg.jpg)

Thanks
-Tim

Alot of money.

Yeah, I'm not very good at this.

*EDIT* Oh yeah, Welcome to the boards.

blue_blank
11-10-2006, 11:43 AM
135 for the rodeo
oops sorry,how much is the gun and the frame altogether. thx for answering

08Lud08
11-10-2006, 01:10 PM
oops sorry,how much is the gun and the frame altogether. thx for answeringI'd say $75-$80 for the rodeo with everything because you can get a refurbished imagine for $60. If you sell it to someone in person new into the sport you could sell it for about $135. The resale for spyders suck and go down alot.

ballerfolife
11-10-2006, 01:34 PM
'05 black to red pilot ACS and all the battery stuff and allen keys it came with
Empire low-rise feedneck
mint egg
20 oz CO2 tank with on/off valve
carleton inc. 68/45 compressed air bottle(no reg or hydro)
crappy Brass ealge Canadian tire mask(soon to be profilers)

UnderCurrent
11-16-2006, 07:22 PM
Hi, I have an '05 spyder Imagine with some upgrades, and I need some money, so I was wondering if you all would be able to help me with an appropriate price if I need to sell it.

All of the upgrades are new, I just got them a little while ago, but with the situation I ran into, I need some money now.

'05 Imagine
14" CP 1 piece .689 Black Barrel
Black Warrior Paintball Roller Trigger
SwiX 50g microswitch
CCM No-rise clamping feedneck
Basic Drop Forward and ASA
ACS Bolt

How much do you think I would be able to get for this setup?

Thanks

ballerfolife
11-17-2006, 12:25 PM
so nobody knows how much my stuff is worth?

scpres1
11-17-2006, 01:35 PM
-VS2

-VS Red Color Kit

-3000PSI HPA Tank

-Halo Rip Drive Hopper

kidonfire
11-17-2006, 03:35 PM
'05 black to red pilot ACS and all the battery stuff and allen keys it came with
Empire low-rise feedneck
mint egg
20 oz CO2 tank with on/off valve
carleton inc. 68/45 compressed air bottle(no reg or hydro)
crappy Brass ealge Canadian tire mask(soon to be profilers)

I'm not very good at this soo....

I'd say about $210 all together.

kidonfire
11-17-2006, 03:36 PM
'05 Imagine
14" CP 1 piece .689 Black Barrel
Black Warrior Paintball Roller Trigger
SwiX 50g microswitch
CCM No-rise clamping feedneck
Basic Drop Forward and ASA
ACS Bolt
Thanks

$130 all together.

kidonfire
11-17-2006, 03:38 PM
-VS2

-VS Red Color Kit

-3000PSI HPA Tank

-Halo Rip Drive Hopper

about $250 together. IDK what the CI is of the tank so I just guessed.

blue_blank
03-03-2007, 10:02 AM
I'm going to a pawn shop and im going to sell them this. i need help on a offer of what i should give them.thanks in advance.:D

what's included: proto one piece barrel,stock rodeo barrel, rodeo w/electronic trigger frame,stock rodeo frame,20oz tank,barrel plug.

http://i121.photobucket.com/albums/o203/blueblank23/IMAG0022.jpg

PumaPride04
03-03-2007, 10:14 AM
I'm going to a pawn shop and im going to sell them this. i need help on a offer of what i should give them.thanks in advance.:D

what's included: proto one piece barrel,stock rodeo barrel, rodeo w/electronic trigger frame,stock rodeo frame,20oz tank,barrel plug.

http://i121.photobucket.com/albums/o203/blueblank23/IMAG0022.jpg
dont even think about goning to the pawnn shop they will give you about 100 dollars for that. your better off selling its here in the sale thread

blue_blank
03-03-2007, 10:22 AM
alright thanks

Oscum Guy
03-03-2007, 10:29 AM
http://i68.photobucket.com/albums/i18/oscumguy/IMG_1109.jpg
http://i68.photobucket.com/albums/i18/oscumguy/IMG_1108.jpg
how much is this worth?
spyder electra '05
dead-on bullet drop on/off
evil detonator reg
stock barrel
esp frame w/electra board.
warrior roller trigger
dye stickies

yod3r
03-03-2007, 12:34 PM
what about this....

Spyder mr2
14" j&j barrel
500 round qloader kit
88ci 4500psi crossfire tank
32* remote coil

wylde01
03-03-2007, 01:08 PM
spyder mr2 (one of the few that actually work w/o probs)
ccm mr feedneck adapter
ccm threaded feedneck
jj ceramic 14 inch
trinity ak-47 ex chamber
switched from stock hose to macro line
empire reloader b
72/3000 pmi hpa tank
pmi coiled remote w/ slide check

all the upgrades have not been used yet if that makes a difference.
the tank is about 2 years old
the hopper is only 11 months old and perfect condition.

thanks for your time

Xtreme
03-03-2007, 09:56 PM
How about this,

MR2
Alamo City Low Blow Bolt
Alamo City cup seals
New Designz HP Valve
Palmers Female Stabilizer
0-800psi Smart Parts Gauge
Palmer Stabilizer Ring Mount
Timmy Detents
CCM Feedneck Adapter
Smart Parts Quick Lock feedneck
14" J&J Ceramic Barrel
32 Degrees Spring Kit
Custom Milled Shroud
Stock shroud included

I am more than likely going to sell this gun based on your assesment!

http://img213.imageshack.us/img213/5743/dsc05288th9.jpg (http://imageshack.us)

Backmanshooter
03-04-2007, 10:39 AM
$140?

Xtreme
03-04-2007, 03:32 PM
$140?

$140 for which gun, and for which member, mine, yod3r, or wylde01

Oscum Guy
03-04-2007, 03:53 PM
or mine.

118917
05-18-2007, 11:37 PM
how much for mine?

avantpaintballer99
05-19-2007, 07:12 AM
spyder e99 avant (black)
14" empire twister
12" stock barrel
Flame Blue CP Drop
ANS Reg. (not sure what kind, its fat and i bought it a few years ago)
Lapco Clamping feedneck
Dye sticky grips

Kenny_McCormic
05-19-2007, 07:24 AM
blue victor 1
14" smart parts progressive
polished internals
grav hopper
20 oz co2

Hossy
05-19-2007, 09:12 AM
spyder e99 avant (black)-50
14" empire twister-15?
12" stock barrel-5
Flame Blue CP Drop-15
ANS Reg. (not sure what kind, its fat and i bought it a few years ago)-??
Lapco Clamping feedneck-15
Dye sticky grips15-20

blue victor 1-25
14" smart parts progressive-10(beacuse of what is said in other thread)
polished internals-dont know
grav hopper-5
20 oz co2-10-15

these are estimates if you were going part them out...
im not the best, but those are ballpark figures

118917
05-19-2007, 04:57 PM
why is everyone ignoring my request for an appraisal????
heres my set up.

LP Spyder Sonix Pro 285fps @ 230psi
SP Linear Barrel
NDZ LPC
Assault Block w/BL gauge
UFD Clamping Feed Neck
Bob Long Torpedo
MR1 Trigger Frame
Maddman Spring Kit
Poorman Lightning Bolt Mod
Lightened Striker
NDZ Valve
Edit/Delete Message

VS3 Sniper
06-03-2007, 06:23 PM
Spyder mr1
Here are the ups

Acp bolt w/two orings
Rapa 4 air thru stock
remote with quick disconnect
14 inch j&j ceramic barrel
3 inch barrel
12 inch lamco big shot barrel with trinity mock shroud machined to fit.
Qloader 200 round setup

Hossy
06-03-2007, 06:24 PM
Spyder mr1
Here are the ups

Acp bolt w/two orings
Rapa 4 air thru stock
remote with quick disconnect
14 inch j&j ceramic barrel
3 inch barrel
12 inch lamco big shot barrel with trinity mock shroud machined to fit.
Qloader 200 round setup


without the loader id say something around the amount of 150.

oh and hit me up with a speedfeed PM man!

alam3503
12-03-2007, 11:41 AM
MR-1 with stock barrel, alamo derlin bolt with no o-rings, 32* vertical adapter, 2-stage expansion chamber, SPPS feedneck and clamp, Trinity AK-47 stock, 32* remote line. This gun is also painted tiger stripe.
Picture is of the paint, gun parts have changed since picture.

battlechaser
12-03-2007, 12:25 PM
May as well throw mine in the hat...

05 Spyder Electra

Custom CNC'd Halfback
16" J&J Ceramic
32* Magnaport Valve
Bob Long gauge
Chrome Check-it Assault Block
Dark Horizons Titanium Striker
Evil Detonator Reg
Psychoballistics drop
Chrome I.P.I. Frame
Scenario Dreams T-board VerC
MuddyTaco Roller Trigger
Dye Stickies
Trinity Feedneck
Empire Reloader II
Modified 05 Sonix Bolt
Powerex Batteries (3) + Powerex Charger

In the mail; CP drop, Timmy Eye Covers

Yet to be installed; Scenario Dreams Eyes

Most parts were bought new... ;)

Pic #1 (http://photos-829.ll.facebook.com/photos-ll-sctm/v154/57/36/515934829/n515934829_250174_1339.jpg)
Pic #2 (http://photos-829.ll.facebook.com/photos-ll-sctm/v154/57/36/515934829/n515934829_250175_3147.jpg)