PDA

View Full Version : Which way is a evo 2 supposed to spin


killerpinecone
07-25-2006, 09:24 PM
If its on the gun the right way, with the lid closest to you and you turn it on, which way should it spin if i look inside, mine spins clockwise, is that good, cause it doesnt seem to be feeding correctely, thanks

Paradox313
07-25-2006, 09:41 PM
im sure you put something on backwards
mine spins counter-clockwise

killerpinecone
07-25-2006, 09:44 PM
i bought it from the nation, then i read some guy in the wtb forums saying he needs a new motor cause it spins clockwise, then i relized mine is slow and jams sometimes,and sure enough it spins clockwise, so i came here. Then i looked in the loader where the balls go and there was a groove where the balls should go the oppisate way, i wonder what it is

bigred76
07-25-2006, 10:01 PM
Flip the connector on the board around. You have the motor hooked up the wrong way, lol. I've done it tons of times, you need to make sure you get it right before you close them back up otherwise it's a pain.


This forum requires that you wait 45 seconds between posts. Please try again in 8 seconds.

killerpinecone
07-25-2006, 10:23 PM
ok, it worx now, thanks

bigred76
07-25-2006, 10:31 PM
NP, enjoy! :D

bamf-hacker
07-26-2006, 03:57 AM
For ease of re-installation next time. Take some nail polish or some white out and mark the connector so you always put it back on the right way. It can be a real pain to finish putting you loader back together and then realize the connection is on wrong....