PDA

View Full Version : Intermittent firing problem on my 06


Cyalume
07-25-2006, 04:52 PM
Hey guys. I was playing today, and my gun started messing up a bit. Ever so often, when im firing, the solenoid will fire, but the bolt will not move. If you keep pulling the trigger, itll fire a few rounds normal, then the solenoid will just click a couple of times, the resume firing normally again. I took everything apart, it all looks fine. I changed the main spring around with the 32 Degrees springs, and it still does it. Im using the stock valve spring and main spring, the PSI was around 550 to 600, and my tank is full. Anyone ever run into this? It will do it in auto, semi, and semi with the eyes. It makes no difference. I was thinking maybe its needing a fresh oiling. Other than that, any ideas?

Thanks,
Matt

ooglieboogliebob
07-25-2006, 06:03 PM
Charge your battery
Replace your battery
Change the capacitor

Then if all else fails ... get a new noid

TStites
07-26-2006, 11:59 AM
[QUOTE=ooglieboogliebob]Charge your battery
Replace your battery
Change the capacitor

I agree with ooglieboogliebob it sounds like you have a low battery check your charger my charger was not recharging my battery correctly and I had a similar problem.

SharpObjects
07-26-2006, 12:47 PM
Never leave your battery in the 06, cause it slowly drains. Take it out when you are done playing.