PDA

View Full Version : ep imagine


Paintball0308
07-21-2006, 10:12 AM
I need to know what I need to make my imagine ep. I need to know every part.

Hob Hayward
07-21-2006, 10:52 AM
Well, its not an easy task...

I'd say: the T-1 Rocket valve, T-1 T-board, T-1 frame from scenario dreams, t-1 ram from scenario dreams, 12v. noid from scenario dreams, 12 v. rechargable battery, T-1 ram cap from scenario dreams, T-1 LPR from scenario dreams, a primary reg, HPA if you don't have it already.

No doubt I've forgotten somthing, but thats the cheapest way, unless you can find a T-1 kit, a zip kit or a The One kit, they're all the same. Still, if you buy stuff from scenario dreams, you buy a Primary reg, and HPA, it'll be at least 300$.

ShadowX
07-21-2006, 11:42 AM
Or, you could Spimmy it.. It would then be FULLY EP and not spring return like a T1.. A good Spimmy conversion would porbably be around 650-700 if you did a GOOD job with good, quality parts..

Total90Oliver
07-21-2006, 11:59 AM
Well, its not an easy task...

I'd say: the T-1 Rocket valve, T-1 T-board, T-1 frame from scenario dreams, t-1 ram from scenario dreams, 12v. noid from scenario dreams, 12 v. rechargable battery, T-1 ram cap from scenario dreams, T-1 LPR from scenario dreams, a primary reg, HPA if you don't have it already.

No doubt I've forgotten somthing, but thats the cheapest way, unless you can find a T-1 kit, a zip kit or a The One kit, they're all the same. Still, if you buy stuff from scenario dreams, you buy a Primary reg, and HPA, it'll be at least 300$.

do you mean 9v or 12v, also I dont have enough money to spimmy it. Also what lines and can I use any other parts from my imagine like springs or other things

So i need this
- T-1 rocket valve
- T-1 T-board
- T-1 frame
- T-1 ram and cap
- T-1 LPR
- EP
- Regulator
- Hpa

Paintball0308
07-21-2006, 12:02 PM
Im at his house and didnt log him out and used his name but its medo you mean 9v or 12v, also I dont have enough money to spimmy it. Also what lines and can I use any other parts from my imagine like springs or other things

So i need this
- T-1 rocket valve
- T-1 T-board
- T-1 frame
- T-1 ram and cap
- T-1 LPR
- EP
- Regulator
- Hpa

Hob Hayward
07-22-2006, 08:45 AM
Yeah you need a 12v. batery to use the 12v. noid, if you want to use 9v. you need a $50 noid instead.

I'm not sure what you mean when you said EP, but I assume you mean solenoid? If so thats then you list is complete. www.scenariodreams.com sells everything listed except for a Regulator and HPA. Keep in mind that you are simultaneously going LP and EP, and that you can't use the Rocket valve above 400 psi for an extended period of time.

From the imagine, you use the body, the stock bolt (if you ottermod it) and um, thats basically it... You can use the stock airline I suppose and the stock ASA, er no, you need an ASA with in line holes aswell, so you might aswell just use macro and buy a new ASA at the same time...

If I were you I'd just wait and buy a Diablo Wrath LTD for ~230$ Unless you want to have an awesome spyder for the sake of it being a spyder.

thechubbss12
07-22-2006, 09:06 PM
Yea id say go for the wrath.... i mean T-1 spyders are awesome and you have more options.... Like a Timmy V/a and LPR but other then that the T-1 and the Wrath are the same idea...

Hob Hayward
07-23-2006, 07:49 AM
Whoaaaaaaaaaaaaaa I just saw that the Diablo slayer is only $200. Its basically a not as good wrath, but it still has a BL torp as a reg, a twist clamp feedneck and its EP.