View Full Version : triger adjustment

07-19-2006, 03:24 PM
Before you tell me to search I already did nonne of it helps. Every body says take off the trigger frame and adjust screw. Well what screw can you show me a picture or be more specific.

07-19-2006, 03:29 PM

Mabey you can draw a circle around the screw and show me.

07-20-2006, 08:55 AM
for the pre play adjustment, the screw can be adjusted while the trigger frame is on the gun. Look where the trigger goes into the frame; right next to it their should be a hole and if you look in there you will see an allen screw. Just use your allen wrench to adjust. simple as that.

07-20-2006, 10:08 AM
This one?


07-20-2006, 02:27 PM
That screw (under the trigger body) moves the trigger blade closer or farther away from the trigger switch; effectively adjusting trigger "throw". The small set screw in the blade itself is a stopper for after the switch is depressed. This can be set so you don't bottom out the switch and mash it in.(although it would take a lot of pressure to crush it) Some people like to set it so the switch is just activated when the stop screw hits. Good luck.

07-20-2006, 03:07 PM
yup, that's the hole where the screw for the pre-play adjustment is. Like sand said, you can adjust the post play screw that is on the trigger to stop it from going any further after it activates the switch.

07-20-2006, 04:15 PM
So why the heck have people been telling me to look inside the trigger frame what adjusment thing is in there?

Also what alen wrench do i use none of them fit?

07-20-2006, 06:58 PM
They are referring to the screw you first mentioned and posted the pic of. That is the trigger throw adjustment. ok?

07-21-2006, 08:49 AM
ok im good now.

07-23-2006, 03:45 PM
i did this on mine trigger i adjusted it so its pushing the button in about 3/4 the way