PDA

View Full Version : Valve leak? Help!!!


Modded-Like-Hell
07-12-2006, 03:12 PM
I just bought a 32* magna flow valve. I installed the valve in and connected the co2 tank to gun. i hear a leak. the leak comes out from the valve. o rings are both good. I believe its the two flat sides on the valve pin that let the co2 out. am also using the stock spyder valve spring. can that be the problem? I also have been ajusting the regulator, everytime i go under 500 psi the gun brups. i know that trial and error, but the stupid leak is pissing me off. Help!!!

DRAGON
07-12-2006, 03:19 PM
Either use a stock cup seal(don't forget the star guide) or if that doesn't work get a Lapco or Black Magic cup seal. If you need the other cup seals use the stock valve pin, guide and cup seal till you get the new cup seal -

Modded-Like-Hell
07-12-2006, 03:21 PM
I tried with the valve pin and cup that came with the valve and the stock spyder valve pin with cup. I still hear the leak. Thats what happens with when you buy a cheap valve to use to make a LP. i thought it was the spring, so i streched it out it still didnt work.