PDA

View Full Version : My MR2 Finally Works Fine!


new_Faction64
07-09-2006, 12:49 PM
Glad to announce all my MR2 problems are gone, except the occasional recocking issue (bolt doesn't blowback properly, or a ball get's jammed).

I'll also add that I'm worried about the trigger frame, I am worried about water and dirt getting into it, is there any easy way I can cover it, but keep the LEDs, and switches accessible?

Msniper
07-09-2006, 01:55 PM
electrical tape - It works wonders

Alien
07-16-2006, 01:55 PM
If someone sell is MR2 contact me. thx you.

breakxeggs
07-16-2006, 09:08 PM
I might sell my MR2 depends on the price you are looking for. I need money to spend on my Smart Parts Shocker.

Alien
07-19-2006, 01:47 PM
msg me break

Command2A
08-01-2006, 11:12 AM
yo there is a problem with my gun it breakes balls often and i have done every thing a new hopper(empire reloader-b) and cleaned it what should i do

Jarhead
08-01-2006, 12:37 PM
I would check a couple of things,
1) Do you have a detent intalled and if so what color is it?
2) Are you using the stock barrel?
3) Have you tuned your velocity? Mine turned all the way down is at 280. It may be too high.


Is this happening on Semi, 3 round or Full Auto?

Command2A
08-02-2006, 08:04 AM
i gt the stock barrel on rate now and on auto it breaks a ball and my capicity is at 260:confused:

Jarhead
08-02-2006, 11:42 AM
i gt the stock barrel on rate now and on auto it breaks a ball and my capicity is at 260:confused:

The only thing I can think of is maybe the detent. Did you break in the ACS spring?

new_Faction64
08-02-2006, 07:39 PM
Guys this is not the thread to discuse your own MR2 problems, please stop threadjacking.

Guitar_kid99
08-03-2006, 05:04 PM
Guys this is not the thread to discuse your own MR2 problems, please stop threadjacking.
hahahaha

Command2A
08-14-2006, 09:39 AM
The only thing I can think of is maybe the detent. Did you break in the ACS spring?


no it id just barrel chops and it is happening ALOT every game and i have done everything new hopper(reloader-b) new barrel(14"mr style trinty) and clean my gun like crazy what do u think the prob is:confused:

Command2A
08-15-2006, 04:08 PM
no it id just barrel chops and it is happening ALOT every game and i have done everything new hopper(reloader-b) new barrel(14"mr style trinty) and clean my gun like crazy what do u think the prob is:confused:

Update... The problem was the ball detent; its way to soft and therefore two balls would be in the chamber (not just one). How I fixed this was to put a light glaze of Krazy Glue on the detent, just enough to give it more holding power. After this I shot off over 1000 balls at full Auto to test and ensure accuracy. Viola.. Not one ball break and no ill effects from the repair.