PDA

View Full Version : Question


ross * pilot
07-07-2006, 01:11 PM
iF you buy a CIP 15* ass. block, can you immediately put on the reg?

WhatThaSmurf
07-07-2006, 01:43 PM
Do you mean will the reg fit on there without modification. If so, the answer is yes, but you will need a longer line to go from your ASA to the reg than you already have.

Sandman_Bravo
07-07-2006, 02:11 PM
And if you have the stock asa you will need the metric to npt thread adapter also!
Good luck.

ross * pilot
07-07-2006, 06:22 PM
so to fit a reg. on, you suggest getting a 15* cip ass. block to replace my VA, macroline, and a new asa??? (what asa should i get??)

can this all be found on paintballgear.com????

WhatThaSmurf
07-07-2006, 07:09 PM
No, you need a longer macroline, that's all. And if you need a metric threaded macro fitting for your ASA, I have one that I am willing to part with.

*edit* Sorry, the macro piece won't help, I forgot it was for a stock gas-thru, not an ASA.

ross * pilot
07-07-2006, 07:53 PM
wait, for my pilot acs, i dont need a new VA, like a CIP ass. block? i just need new macro line???? gahh soo confused! and what is a metric threaded fitting for your asa.

Sorry, im just struggling here. i just need to know what to get if im getting a reg.

WhatThaSmurf
07-07-2006, 07:56 PM
If you are just getting a new reg, you do not need to replace your VA.

If you wish to buy an Assault Block, you will need to run a longer line to your reg than what you already have on there because of the 15* offset.

ooglieboogliebob
07-07-2006, 08:54 PM
... how about this ...

1. Get the assault block
2. Get a reg (Torp, 2 liter, Cp, etc)
3. Get a 90* macro fitting, and straight metric macro fitting (from smurfy)
4. Get macroline hosing (your color preference)
5. Put assault block on body, reg on VA, 90* macro on VA, straight fitting on ASA.
6. Cut macro to right size then slip in fittings
7. Have fun, be rough, be tough ;)
Remember to put TEFLON TAPE on all threads (3-5 wraps)

Hopefully this helped

ross * pilot
07-10-2006, 08:33 AM
ok, thanks ooglie... big help.... but if i get a CP reg, it already has a fitting on the bottom right? so do i need the 90* one?

ooglieboogliebob
07-10-2006, 02:53 PM
... it'd probably be a straight fitting ... just get the fitting just incase ...