PDA

View Full Version : E-trigger Q's


Jimmyd24
06-30-2006, 06:15 PM
I remember reading a thread that said that you could decrease the distance between your trigger and that little sensor by turning some screw on the e-trigger. But i cannot seem to find this screw on my friends imagine, please help

Guitar_kid99
06-30-2006, 06:39 PM
look into the top of the trigger frame there should be a screw holding the frame on the marker and a hole next to it stick a small allen wrench into the hole and turn it clockwise to move it closer to the trigger switch

ooglieboogliebob
06-30-2006, 08:56 PM
nope ... not on the imagines ... the imagines you have to take the whole frame off ... and then on the trigger ... the top is a screw ... you need to screw it out (left)... stick the frame on tight and see when it's good ... no allen wrench ... it's a phillips screw driver

bamf-hacker
06-30-2006, 09:08 PM
You have a rocking trigger the adjustments may be different for you.

I would look at the manual for it and see where the adjustment screws are.

HacKeR

Hob Hayward
07-01-2006, 04:46 AM
nope ... not on the imagines ... the imagines you have to take the whole frame off ... and then on the trigger ... the top is a screw ... you need to screw it out (left)... stick the frame on tight and see when it's good ... no allen wrench ... it's a phillips screw driver

The new imagines with the blade trigger have external adjustments though...

Jimmyd24
07-01-2006, 07:42 PM
i was askin bout my rockin trigger, i was wondering for my friend. hell, i wouldnt need to adjust the rocking trigger triggers they are already to sensitive half the time i will fire it in my own bunker by accident. lol

ooglieboogliebob
07-01-2006, 08:18 PM
... how about this ... what year imagine is it ....

If you don't know ... does the feedneck have holes or tabs ??

Meaning ... if you look at the feedneck and you unscrew it do the screws hook on to the feedneck or does the head of the screw hold in the feedneck ....

Jimmyd24
07-01-2006, 08:41 PM
imagine 04