PDA

View Full Version : Help With my Pilot


kkoz
06-21-2006, 09:01 PM
How do you get the top cocking knob out of my pilot acs?

Total90Oliver
06-21-2006, 09:10 PM
I think this is wut u do, take out the quick disconnect pin and take out the back piece were the spring,the cocking bolt,the spring guide and the acs bolt are and then just do wut u want do with the bolt but put all the pices back and keep them organized or else it gets really frustrating thats wut happened to me

kkoz
06-22-2006, 01:00 AM
well my co2 leaks i think its the little o ring in my elbow

Sandman_Bravo
06-22-2006, 02:14 AM
Where is the leaking co2 coming out? I don't know of any elbow with an o-ring that can leak co2. Are you referring to the vertical adapter? Gives us a more accurate description so we can help.

kkoz
06-22-2006, 01:47 PM
like where you screw in the co2, but like in the beginning of the pipe..thing XD i cant remember the name, the elbow part

http://img368.imageshack.us/img368/5581/pilot2qi.jpg (http://imageshack.us)

schock
06-22-2006, 01:55 PM
you pull it out...

ShadowX
06-22-2006, 02:04 PM
like where you screw in the co2, but like in the beginning of the pipe..thing XD i cant remember the name, the elbow part

http://img368.imageshack.us/img368/5581/pilot2qi.jpg (http://imageshack.us)

Replace the O-ring on your tank..

kkoz
06-24-2006, 11:49 AM
its not the one in my tank its the little one inside there that im haveing problems with

EliteEagleX
06-24-2006, 03:15 PM
Look dude, read your diagram manual and see what part number it is, it will describe it then we can help you more, to get out a Top Cocking Bolt you have to pull out the COCKING part which you just pull strongly UPWARD, then you take off the side-panel on where your battery is and press the circular thing inward (You can't miss it) it goes back and forth when you fire you push that back completly and it'll be flat then you can pull out the bolt\hammer assembly, you can't pull it out w\o taking off the TOP-Cocking Knob though... this is one downfall of spyder guns which is that you HAVE to take off the battery cover to remove the bolt assembly.

Sandman_Bravo
06-25-2006, 04:13 AM
this is one downfall of spyder guns which is that you HAVE to take off the battery cover to remove the bolt assembly.

I assume you're referring to the grip as the battery cover. You don't have to take it off to get the bolt out. Remove the dust cover from the rear of the marker via the quick strip pin. Cock the bolt before removing the cocking pin from the bolt. Turn the marker so the rear is pointing towards the ground and tap the back of the grip against your other palm. Gravity & inertia will drop the bolt & hammer out of the gun. Make sure you catch the bolt, hammer, and rubber bumper before it hits the ground. Or you can take a slender screwdriver (or the cocking pin)and reach into the top of the gun where the opening of the cocking pin is and push the bolt out of the marker far enough that you can pull it the rest of the way out.

http://www.kingman.com/section/support/videos/videos.html

kkoz
06-25-2006, 02:39 PM
i got it fixed :P thanks guys for the help