PDA

View Full Version : Help Please!!!!!!!!!!!!!


wylde01
06-21-2006, 08:21 AM
ok so im messin with my gun and i find an allen screw on top underneath the sight rail. i go and unscrew the dang thang only to find out that it goes to the t-bar cocking thingy. when that came apart the two little springs fly out and i dont know how to put them back in so if anyone could help i would like it

thx

TenderVittles
06-21-2006, 08:45 AM
LOL man that happened to me before and it sucks, now it happens to me all the time and its no problem to re-install. The same thing happened to someone else and I (tried) to explain it. Check this thread out : http://www.spyder.tv/forums/showthread.php?t=3773

NextoN
06-21-2006, 08:57 AM
I lost my spring in the toilet on the bathroom isnt that BAD luck ?? but I got it :P lucky me.. But it took me about 10 min to figure out how in the hell I have to fix it:). It's a bit trickey :rolleyes:

wylde01
06-21-2006, 09:12 AM
well thanks for the help but theres one more thing. you told about how to put it all back together but can you elaborate a little more on how to put the whole thing back on the gun.. ......if you know what i mean

wylde01
06-21-2006, 10:27 AM
ok guys.........i just put it back together kinda! i can put it all together withiout the springs. i still cant figure out where to put the springs

davecuz1975
06-21-2006, 11:57 AM
hi dude wow its not just me then have a look on page 2 the threads called( help cant figure out how to re install) by myself the guys gave me plenty of detail and diagrams it took 10mins to sus it, like me, note 2 self leave it alone the cocking system that is:D

wylde01
06-21-2006, 01:19 PM
ive read all that but it says to put the springs in between the weaver thing but i dont know what that is?

NextoN
06-21-2006, 01:50 PM
there are two small and long springs you need to put one at the left side of the T-grip and one on the right. The you have to hold them togehter by your finger or so..

It's hard to explain so im sorry if you dont understand me... But it is logic just use ur brain and you will be fine ;)

wylde01
06-21-2006, 01:59 PM
i have done that but the whole thing wont go back on with the springs in it?

TenderVittles
06-21-2006, 02:13 PM
yeah.. sorry for not explaining it very well its hard. If you have it together correctly it should slide in fine, you have to try to get the top knob of the bolt in line with the middle groove of the cocking mechanism. I think it helps if you cock it back first.

wylde01
06-21-2006, 02:27 PM
thanks ill try that and see if it goes back on

Eric182
06-21-2006, 04:14 PM
Step one: Get in car/bus/bike or any other form of transport with MR-2
Step two: Go to the place where you got it
Step three: Get a tech to fix it

wylde01
06-21-2006, 04:22 PM
Step one: Get in car/bus/bike or any other form of transport with MR-2
Step two: Go to the place where you got it
Step three: Get a tech to fix it


step one: easy
step two: cost money
step three: doubt they will know any more than i do

wylde01
06-21-2006, 06:49 PM
ok so i finally fixed it! what i did was, instead of putting the silver u thingy back on the gun before i put the rest of it on i put it on the t bar with the springs and everything. after that i went and slid the whole thing back on my mr2 (while the gun was cocked) pulled the trigger and it slid right back on. the most important thing that i learned out of all of this is that I WILL NEVER TAKE THAT APART AGAIN. it was the biggest pain in the @$$ that i have ever dealt with on a gun

Alien
06-29-2006, 06:01 AM
Where i can find a canadian site to buy the MR2 at low price . around 200 $

wylde01
06-29-2006, 06:32 AM
have you checked ebay? they have the lowest prices around with free shipping

TenderVittles
06-29-2006, 06:33 AM
You cant.

Alien
06-29-2006, 06:33 AM
why i cant?

TenderVittles
06-29-2006, 06:39 AM
Most sites have the MR2 for more than $250 (Canadian sites)

Alien
06-29-2006, 06:42 AM
Ok. On Ebay i cant find it ...
http://search.ebay.ca/search/search.dll?sofocus=bs&sbrftog=1&from=R10&catref=C6&satitle=Paintball&sacat=47249%26catref%3DC6&bs=Search&sargn=-1%26saslc%3D3&sadis=200&fpos=ZIP%2FPostal&ftrt=1&ftrv=1&saprclo=&saprchi=&fsop=1&fsoo=1

TenderVittles
06-29-2006, 06:43 AM
Yeah no canadian people are selling MR2s, but on ebay.com there are lots... they wont ship here so that sucks. They might if you ask them though.

Alien
06-29-2006, 06:44 AM
You where did u buy ur MR2

TenderVittles
06-29-2006, 08:35 AM
I bought mine at Soliders of Fortune paintball for $320(canadian) a while ago.

Alien
06-29-2006, 09:35 AM
i have found one at 125$us on ebay

breakxeggs
06-29-2006, 01:25 PM
I got mine for 200 I think off of www.Actionvillage.com

Guitar_kid99
06-29-2006, 02:28 PM
i got mine brand new for 160
i have connections:cool:

Alien
06-29-2006, 04:58 PM
Are you from Canada ? Guitar

Crazy Rusher
06-29-2006, 05:09 PM
hey i found it useing Froogle for only $165 at sports Authority..., but o snap now it is up to $235 musta realized their mistake.... durn... either that or it was a special deal.. o well...

Guitar_kid99
06-29-2006, 06:17 PM
nope i'm in the US

Alien
06-30-2006, 06:30 AM
If i go to Old Orchard to buy the MR2,apex barrels and a Viewloader hopper does the USa customs gone ask me questions about that ? .

Highbinder
06-30-2006, 05:22 PM
Customs could probably care less about your paintball parts. I wouldn't sweat it.