PDA

View Full Version : Use 600 PSI regulator on my Xtra?


robertg
01-03-2006, 08:05 AM
I am looking at using the AIM Shock regulator, but its max is 600PSI. I run CO2 and my xtra has a Bob Long Cyclone LPC, Macroline kit, Dead on drop forward with on/off, Shockteck Superfly bolt, and rocking Trigger with Esp striker. Would this be ok? Any info would be appreaciated. Thanks.

shunut
01-03-2006, 08:43 AM
I might work with the reg set at 600psi but its hard to tell. You're just going to have to hook everything up and try it out. If it doesn't you should be able to get you operating pressure down fairly easily. Probably just a high flow valve would drop it down low enough.

robertg
01-03-2006, 08:48 AM
Thanks, do you think running CO2 would still be ok?

druid
01-03-2006, 10:18 AM
yes it should be OK. I am running a stock Ion reg on my Xtra and it works just fine with stock (but Otter modded) internals.