PDA

View Full Version : dye 45/45 question.


johnnyblast
06-14-2006, 12:55 PM
i recently bought 45/45 from pbn and i have few questions.
----------------------------------------------------------
1. the seller took off the top part (i think its called regulator) so i need to put it back together. should put some teflon tape or blue loctite on it or would i be ok without those things??

2. on the top part (regulator??) i see one empty spot next to gauge or next to fill nipple... is this normal for dye tanks?? i dont think my p.e tank has one empty spot on the regulator.

i would ask him but he doesnt reply back. help me out on this one guys, THANKS!!!!!!!!!

ShadowX
06-14-2006, 01:11 PM
Well, I know nothing about Dye tanks, but it sounds like you got ripped.. There is never supposed to be a big hole in a Tanks Reg, unless it is missing a Part.. So it is missing something important, and the reason he isn't replying is because he knows you found out that something is missing and doesn't want to get caught scamming..

One question.. Why did you go from PMI to a Dye tank?? Crossfire is far superior to PMI or Dye, but PMI is much better than Dye.. W/e, I guess that is not important...

Take it to your proshop and have them re-assemble it.. If the tank is completely disassembled from the Reg, I recommend having a certified airsmith (can be found at proshop) put it back together.. He will figure out what exactly is missing and then you can buy what is missing and the tank will be fixed..

johnnyblast
06-14-2006, 02:23 PM
i have a friend who has dye peanut tank and he also has that empty spot on his reg. so i guess its all good... i'll take it to a shop and see
THANKS!!

druid
06-14-2006, 02:58 PM
take it to the proshop and have THEM look it over :dodgy:

johnnyblast
06-14-2006, 03:23 PM
http://i19.photobucket.com/albums/b189/knuckledragger1234/DSC00238.jpg

i got this picture from pbn and i hope you guys can see that empty slot next to fill nipple. doesnt look like big issue... just want to find out what it is for.

ShadowX
06-14-2006, 05:34 PM
I am thinking its missing a burst disk, That is only the thing that keeps the tank from blowing up.. Glad its not important :dodgy:

ShadowX
06-14-2006, 05:36 PM
All sarcasim aside... DO NOT fill that tank until you have an airsmith look over it.. Have him look over your friends also..

timmyshoota
06-14-2006, 06:17 PM
The "empty" hole is the burst disc. Dye ones are weird like that. For the reg, take it to the proshop and let them install it. IF you want to do it yourself, put it on with RED loctite. I'd have the proshop do it though.

bamf-hacker
06-14-2006, 06:29 PM
I am guessing that if you are not sure what the empty hole is for, you should not even try to put the reg in yourself. Timmyshoota is correct, you need to use red Loctite, but it needs to be done right. The last thing you want is a 4500psi projectile.

HacKeR