PDA

View Full Version : Need Help!!!


splater18
06-06-2006, 01:48 PM
my rodeo is leaking from a hole in the expanison chamber can someone please tell me whats wrong and how to fix it before i go to my local proshop

my gun also sounds alot louder than it used to and kicks alot more to could it be because of the leaking thanks alot

druid
06-06-2006, 01:58 PM
Xchamber has a series of baffles and Orings inside. Grease/replace them.

could be.

splater18
06-06-2006, 05:12 PM
how do get into the reg i cant seem figure it out

splater18
06-07-2006, 11:05 AM
some please help me !!!!!!!!!!!!!!!!!!!!!

kies
06-07-2006, 02:12 PM
Just replace the o-rings and get some teflon tape to seal everything up tight.:)

splater18
06-07-2006, 07:00 PM
the problem is i cant get to the orings in the chamber can someone tell me step by step how to get into it

Jimmyd24
06-08-2006, 10:22 AM
i had the same problem with my gun, what u do to get to it is you need to first unscrew the regulator from the base of the trigger and then begin to unscrew your chamber/expansion chamber from your gun, you can probably do this by getting plyers and grip the chamber and begin to unscrew it counterclockwise. Once you get that, you will find an o-ring, replace the o-ring, you made need to put some gun oil on the new o-ring to get it back on because it is a pretty tight fit.