View Full Version : Re-cocking issue

06-05-2006, 08:02 AM
My MR2 is going crazy!!!! I have to keep re-cocking it w/paint or with out, Not sure what the problem is. Took it apart, cleaned it, oiled it, and check all o-rings including valve. Does anyone have an answer to this problem?:mad:

06-05-2006, 08:14 AM
I am sure you already looked, but is your tank low on air?


06-05-2006, 02:31 PM
how many threads are on this subject so far? See if you can look at the other threads... the list a multitude of answers for that problem.

06-05-2006, 04:55 PM
Yeah there are quite a few posts on this already. But I'd probaly say the valve pin has come loose from the cup seal (parts 13 and 12, respectivly on the diagram). Put Loctite on the threads and tighten it firmly and it should solve your problem. If the cup seal is ruined or the threads are stripped, there is a new one in the parts package that comes with the gun.