PDA

View Full Version : expansion chamber


Mafia_Boss
05-28-2006, 04:46 PM
what expansion chambers aer good for th Mr-1?
and would this fit http://www.actionvillage.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/DisplayProductInformation-Start;sid=iLU3sSlslpE3BW0WumP3GSPK9n3LRajdi2A=?Pro ductID=wbLAqArbD2AAAAEAppyhw5qH (http://www.actionvillage.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/DisplayProductInformation-Start;sid=iLU3sSlslpE3BW0WumP3GSPK9n3LRajdi2A=?Pro ductID=wbLAqArbD2AAAAEAppyhw5qH) because it seems like it wouldnt but someone said it did

ooglieboogliebob
05-28-2006, 05:28 PM
it would but ... it's WAY expensive ....

I'd say go for the palmers reg for that price ... just get an adapter for it to fit ..... If you wanta spend even less go for the torp ... great reg

Live2Play
05-28-2006, 07:46 PM
:yeahthat: Do not buy an expansion chamber. With a regulator you'll have better consistency. More than you could ever get with an expansion chamber. Like mentioned above, Palmers is great when in use with co2. Even if you wanted to get that for the Milsim look, thats still pretty pricey for an expansion chamber put inside a mag.

Frat
05-28-2006, 07:48 PM
I would mount a reg. That expansion chamber will not fir the MR1 with out an adapter. Lapco makes a Spyder VA that works very well.

Ghost Bear Reborn
05-29-2006, 01:26 PM
That expansion chamber will not fir the MR1 with out an adapter.

How do you know this?

Frat
05-29-2006, 02:58 PM
Originally Posted by Frat
That expansion chamber will not fir the MR1 with out an adapter.


How do you know this?

Because I mounted one on my MR1. The MR1 does not have a vertcal adapter or vertical ASA. The way the MR1 is set up I do not know if you can use as vertical adapter (Assault block style). Lapco make a vertical ASA adapter specificaly for Spyders.

http://i19.photobucket.com/albums/b170/lhofeld/MR1003.jpg

Mafia_Boss
05-29-2006, 05:02 PM
is their a regulator that has the same milsim look? or even better a small enough one to put the clip thing over

ooglieboogliebob
05-29-2006, 06:50 PM
IMO with the adapter and the torp .. it'd still have the milsim look ...

Frat
05-29-2006, 07:25 PM
It will depnd on the direction you want to go. If you want appearance leave it like it is or try mount one of the expansion chambers that looks like a magazine. If you want performance then you want to go with a reg. My MR1is fully functional and reliable at 400PSI. Not exactly LP but still half of the designed operating pressure. More shots out of the tanks and more consistant shots means more to me than does it look Milsim but that is my preference yours may vary.