View Full Version : Help!

05-16-2006, 04:55 PM
How do u know how much the output on your tank is?

I have a Pure Energy 72/3K

i need help please respond

05-16-2006, 05:00 PM
72= 72 cubic inches
3k= 3000psi

usually about 800psi output if high pressure
but idk the lp tank output.
you could go to the manufacture website and check it out there

05-16-2006, 06:55 PM
should say on the tank somewhere.

05-16-2006, 07:10 PM
yep, output PSI is 800psi ... all highpressure tanks are.. LP tanks are a little less that half that i believe ...

05-16-2006, 08:26 PM
LP tanks have an output of 400-450psi depending on who makes it. :)

05-17-2006, 03:39 AM
PE seems to have thier LP tanks out put of 350 PSI.... instead of 400 or 450.. I had one for a while.....

05-17-2006, 09:55 AM
If you read the note on the manual for the LP spring kit that Pure Energy offers as a replacement here, (http://www.buypmi.com/pdf/pressure_springpack.pdf)you'll notice it says that your tank's output will be 480-500psi, and can be adjusted slightly by taking out or putting in a couple springs. :)