PDA

View Full Version : How to adjust the trigger???


mv540
12-31-2005, 07:09 PM
I bought a acs pilot, and it is pretty good:) ...but how can i adjust the trigger... do I have to diassemble my gun?..

any help will be apriciate:p :D

ad0131065
12-31-2005, 07:53 PM
You just have to take the trigger frame off. there will be a small screw on top of the trigger and you just adjust that. Screw it in to make the trigg go farther away from the micro switch and out to make it closer.

HITMAN
12-31-2005, 08:17 PM
i didn't kno u had to take the whole trigger off because i don't i jus adjust when its still on the entire gun.

millight3
12-31-2005, 08:38 PM
you dont have to take the whole trigger off, get the medium sized allen wrench and like twist that screw thing up in the gun near the trigger and you will figure it out.

mv540
01-01-2006, 12:24 PM
thanks i wil have to try it:)

mv540
01-01-2006, 12:40 PM
At what distance did you recomend me to adjust the trigger?...1cm, 0.5cm...etc:) :D

ricochet08
01-01-2006, 07:38 PM
hmmm...on the pilot i used (and on my imagine :) ) i don't have to take the trigger frame, or the trigger off @ all. there's a hole close to the trigger frame and u can adjust it from there. then if u want, u can adjust the back stop.

:D

adjust to ur liking :p

ooglieboogliebob
01-02-2006, 04:45 PM
welll you'd havta fiddle with it actually .. just make the trigger touch the button .. but not press it down .. and you should be find.. you just needa take ur trigger frame off and then press it down real hard on your gun when your testing for it... not all are the same ... so you'd havta do it urself .. and use your own opinion

bamf-hacker
01-02-2006, 05:08 PM
and I would suggest to add a drop of blue loctite on the screw. It likes to move during game play.

HacKeR

bigred76
01-02-2006, 05:20 PM
Not blue Loctite. Get a bottle of clear nail polish and put a drop of that on the THREADS of the screw, not the head. You want to be able to adjust it still. ;)

bamf-hacker
01-02-2006, 05:33 PM
Not blue Loctite. Get a bottle of clear nail polish and put a drop of that on the THREADS of the screw, not the head. You want to be able to adjust it still. ;)

Well once I got my trigger set up right I am not going to play with it anymore. So the Loctite is not bad for me. But good idea with the nail polish.

HacKeR

HITMAN
01-02-2006, 06:16 PM
U can do that are do wat i had to do put some tefflan tape on it its a white tape for threads.Spellin may be wrong.

bigred76
01-02-2006, 06:19 PM
Well, you never know if you might sell it later on, Hacker. So you want to do something temporary that wont screw over it's value. ;)

bamf-hacker
01-03-2006, 08:03 AM
Well, you never know if you might sell it later on, Hacker. So you want to do something temporary that wont screw over it's value. ;)


Nah blue loctite is easly removed. A little heat and come right off. I used to use it all the time when I worked on cars.

HacKeR