PDA

View Full Version : why is my primal so slow.


Shocker Guy
05-05-2006, 08:54 AM
Does any one have any idea my primal is so slow. I talking I can't even out shoot a gravity feed hopper with the eyes off. I've tryed a t-board made it even slower. Can someone please help.

Patrick

druid
05-05-2006, 10:12 AM
TBoard has to have the default settings activated before you try to program it. Did you do that? If so, reset the default settings. Then try a ROF of 19...debounce of 5ms...eye delay of 2ms...and go from there.

thechubbss12
05-05-2006, 01:03 PM
Humm eye delay actuly slows the gun down doesnt it?... maybe not but thats what i thought....

Yea t-board need serious reprogramming casue the defalt setting suck bad....

Also try and remove the return spring in you trigger... that way you dont have to put the extra grammage to activate the switch...

druid
05-05-2006, 02:59 PM
Humm eye delay actuly slows the gun down doesnt it?... maybe not but thats what i thought....
...

yes, A higher eye delay will but we're talking around 4ms. In a slower feeding hopper, you'd want it to be able to keep with the board settings

Shocker Guy
05-05-2006, 07:11 PM
Thanks for the T-board settings i will try them when I get my board back. Is there any way of making it faster with out the t-board?

druid
05-05-2006, 09:22 PM
nope...well...xsf board...but it's service isn't as good as Damon's and the board's more $$

thechubbss12
05-06-2006, 04:59 AM
Try takeing out the return spring it will make a huge diffrence in your walking capabilities....

vikingshadow
05-06-2006, 05:56 AM
Stupid question, but does the gun have paint in it? A lot of times, the gun won't shoot fast if it's not seeing paint going by the eyes....Even if you just set a ball inside the breech, it's not registering the movement of the ball, so it's saying "SLOW DOWN" so no chops happen....

Hob Hayward
05-06-2006, 07:55 AM
Shouldn't that not matter because he said he disabled the eyes...

vikingshadow
05-06-2006, 08:09 AM
Not if the eyes didn't actually get disabled. Seen that happen before as well. Guy thought the eyes were off, but for some reason they never shut off.

I was just wondering anyways...

Shocker Guy
05-06-2006, 07:45 PM
it's slow with the eye on or off. will a 50g micro switch for a esp frame work in a primal? I will try taking out the trigger spring.

Thanks every one so far.

thechubbss12
05-06-2006, 08:00 PM
Yes the switch will work =)....

Shocker Guy
05-07-2006, 02:35 PM
Ok cool I'll put a 50g switch in today and get rid of the trigger spring. I hope this works.

Shocker Guy
05-08-2006, 09:50 AM
I don't thing it's any faster. It's easyer to get to speed and keep it there. But no faster. Thanks for all the help everyone.

thechubbss12
05-08-2006, 03:54 PM
humm

You can..
A.) sell it
B.) buy a new board.... with a ramping chip... then if you dont like it sell it for more....