PDA

View Full Version : ipi 3.0 frame stopped changing from semi


Heroguy
05-02-2006, 01:35 PM
I did not take out the jumper ever and have charged it completely

I will be working to solve this problem as you give hints

bamf-hacker
05-02-2006, 02:00 PM
check the jumper anyway, they have been known to come loose during play.

HacKeR

Heroguy
05-02-2006, 02:09 PM
ok thx

thechubbss12
05-02-2006, 02:19 PM
Yea that is a torney lock feature.... I had a fenix board that did that..... so thats probibly it =)...

Heroguy
05-02-2006, 02:24 PM
that solved it thanks bamf i never thought it would just fall off silly me

bamf-hacker
05-02-2006, 02:46 PM
YW..

if you VERY carefully spread the pins on the board a little it is less likely to fall off when you slide the jumper back on. BUT BE VERY CAREFUL, the pins are delicate.

HacKeR

druid
05-02-2006, 02:59 PM
NO! yer better off giving the jumper a slight pinch with a pliers. Never mess with stuff connected to the board (unless you are good at it already)

bamf-hacker
05-02-2006, 03:01 PM
:yeahthat: that would work to...

Druid always got my back :)

HacKeR

Slammed0
05-02-2006, 03:22 PM
check the jumper anyway, they have been known to come loose during play.

HacKeR


Yep, mine did just the other day actually.

vwjimmy
05-02-2006, 04:24 PM
i think slight bending of the pins is ok unless you are a butcher.......
if you never use the thing in tourneys....solder the jumper on....:D

bungeye
05-03-2006, 12:50 AM
y wld u solder the jumper on. why dont u just bend the pins together then put a bit of soler on it.

bamf-hacker
05-03-2006, 04:41 AM
y wld u solder the jumper on. why dont u just bend the pins together then put a bit of soler on it.

you can but again BE VERY CAREFUL. The pins can break eaisaly... then you get to buy a new board.

Your call.

HacKeR

bigred76
05-03-2006, 10:10 AM
:yeahthat: I personally reccommend the jumper, but without solder...I have never had a problem since i bent the pins ever-so-slightly, and dont foresee another problem.