View Full Version : Custom PVC Gun Stand.... 56k Beware

04-30-2006, 08:22 PM
OK I have seen some gun stands in the past and even got some instructions from members here. So here is mine made out of PVC, that is adjustable for each gun and even for the surface you have it on and collapsible for storage.

I am going to post some pics, parts list and instructions. Here you go....

Parts List
3/4" PVC Pipe Sections
22" long x2
6" long x2
2 5/8" long x2
1 1/4" long x10

1/2" PVC Pipe Section
8 1/4" long x1

3/4 T's x6
3/4 X x1
1/2 to 3/4 T x1
3/4 elbows x4
3/4 cap x4
1/2 cap x1

other parts
2 1/2" cotter pin x1
3/4" pipe insulation 8" x2

PVC pipe cutter or hacksaw
Drill and Drill bit the size of the cotter pin
PVC cement
rule and marker
Dremel with cut off wheel (not necessary but nice to have)

OK here we go.

Pic of all of the parts, it is a good idea to cut all the parts first the lay it all out so you can dry fit everything before you glue.


I don't think you all need a step by step on where the pieces go so here is a pic of the front assembly and the rear assembly (if you want step by step instructions please PM me. NOTE the spots where NOT to glue or it wont be adjustable or collapsible to take up less space.

Front Assembly


Rear Assembly


Stand Completed empty, Collapsed, with my marker in 2 different positions.




All that is left now is to paint it... Any plastic spray paint will work.

Enjoy your build....

05-01-2007, 06:10 PM
This thread has been cleaned and lets keep it that way.

06-06-2007, 05:59 PM
what can u use a stand for?

06-06-2007, 07:27 PM
You use the stand to hold the gun. Hence gun stand. :)

06-06-2007, 10:09 PM
I dunno if i would ever really use a stand, aside from at maybe tournaments, for the most part, im cool with setting it on a towel or something. and i never have it home outside of the case unless im using it.

that being said, thats a pretty sweet set up, i like the adjustability! if ever i create one of these, i think ill use those plans

01-29-2008, 11:34 AM
hi what was the total price for the parts

01-29-2008, 11:59 AM
$10-$15 tops

02-18-2008, 11:20 AM
Ive always wondered.. Isn't there some possibility or the barrel warping???

02-18-2008, 04:36 PM
not unless you heat it up with a torch or bend it some how

Combat Wombat
06-11-2008, 04:51 PM
The amazingness of PVC. :) I think I'm going to make one now.
Thanks for the pics

06-11-2008, 05:47 PM
How much does this run? $20

didn't read got it

11-25-2008, 06:43 AM
hey dan, will this stand work without a tank, or are the pipes too far apart?

11-25-2008, 06:51 AM
It wont as is, but you can make an easy riser to hold the ASA. I have done it with one of the stands I made.

You will need a strap though to hold the marker straight, since the bulk of the tank is what keeps it from rolling off the stand. I just used some velcro straps.

11-25-2008, 03:57 PM
alright, thanks. i plan on making a few over winter break. i hate having my guns just laying around my room.