View Full Version : Help

04-28-2006, 06:41 PM
OK im planning on getting one of these http://www.mikespaintball.com/mf4500.htm the Manifold Max Flo Inline Regulator. I was wondering what kind of air system you could get...CO2, N2 on it and what would fit into it. Like a preset n2. Also what kind of hoses would you need for it. I would like to run this on my spyder pilot acs. Help me out, I dont know alot about the air systems.

04-29-2006, 04:52 PM
Looks like you need to decide what size hpa tank to use, i see a macro fitting on there so you would need a macroline fitting for your reg/expansions chamber, also make sure that the reg output is high enough to work on your gun, being as most stock spyders take around 800 psi to operate on

04-29-2006, 07:15 PM
You need an HPA bottle(only) that directly screws on to those. That's what the threads on them are for. A bottle by itself with no valve/reg -

05-11-2006, 01:23 PM
Would this http://www.actionvillage.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/DisplayProductInformation-Start;sid=Bx6yTt7tUnqy9pqOr1py5tQkol4Hkl9cBMs=?Pro ductID=OAKsFAY7hlsAAAD5MtFJBmGq

work for the regulator like this- http://www.mikespaintball.com/mf4500.htm the Manifold Max Flo Inline Regulator. Would I want to buy the high pressure or low pressure Manifold Max Flo Rgulator for my spyder pilot.

05-11-2006, 03:59 PM
yeah, it would, but you'd have to take off the reg that's already on there. Look around for an HPA tank that is being sold without a regulator on it.
There might be one floating around the BST here....you never know.

yamaha cow
05-11-2006, 04:42 PM
the bottle u have there doesn't need that regulator thing the bottle on action village fits right into your duck bill.

05-11-2006, 05:40 PM
... he knows that .. but he wants the maxflo reg on his gun .. but you know the thing that has threads on that 72/3k bottle ?? ... he doesn't need that .. rather just the max flow .. thats why ...

05-26-2006, 06:03 PM
Ok i found the thing im looking for. Ill get the Manifold Max Flo Inline Regulator, then im going to get a smartpart co2http://www.smartparts.com/Store/default.aspx?Prod={09A201B7-CA77-4B47-91BC-6A060DDEAD5E}
.On the Manifold Max Flo Inline Regulator it says High pressure or low pressure what would be the best for running co2 right now, but possibly going to run compressed air later on.

Also how would you fill up the co2 tank with out that nozzle on it?:confused:

I want to run this set up on my spyder pilot.

06-01-2006, 12:35 PM