View Full Version : Slacky bolt

04-27-2006, 11:02 AM
I got a spyder pilot and I have polished the internals. Now the bolt has a little slack. How this will effect my markers performance? Should I get a new bolt?


Hob Hayward
04-27-2006, 02:52 PM
So long as you didn't sand too much it should be fine. Is it a pilot ACS? IF so you don't want to sand to much bcause delrin comes off much more easily than aluminium. If you've got an old spyder, you should be fine, so long as the o-rings still contact the inside of the body.

04-27-2006, 04:24 PM
actually if it's derlin.. you shouldn't sand it at all .... it won't matter on the performance part on

If it's aluminum.. use 800 to take the scratches out then 1000 and 2000 to smooth it out then mothers mag to polish it .. or a dremel polishing wheel

04-27-2006, 11:51 PM
Alright. I used my dad's polishing equipment, he's a goldsmith. And it is an old pilot , aluminium bolt.