PDA

View Full Version : Lapco feedneck???


SnOoZ
04-23-2006, 08:42 PM
i know ive seen a lapco feedneck for a spyder b4 and looked all over and cant find any. If any1 can give me a link to it.....maybe im just crazy :smirk:

UKwithPride
04-23-2006, 08:52 PM
http://www.lapcopaintball.com/prod/cfn.html

SnOoZ
04-23-2006, 09:03 PM
what was the feedneck hacker had on his marker?

UKwithPride
04-23-2006, 09:28 PM
an ANS Feedneck

DRAGON
04-23-2006, 09:32 PM
I'd go wif da CCM feednecks (http://www.sundragonpps.com/catalog/item/1535699/1695058.htm). Best bang for your buck with great customer service IMO -

UKwithPride
04-23-2006, 09:48 PM
I'd go wif da CCM feednecks (http://www.sundragonpps.com/catalog/item/1535699/1695058.htm). Best bang for your buck with great customer service IMO -

Most def. Had one on my cocker and I have one on my ion. Love them.

bamf-hacker
04-24-2006, 04:06 AM
I have a Hybrid feedneck on my Spyder.

http://img91.imageshack.us/img91/3291/1000626large3zg.jpg

HacKeR

SnOoZ
04-24-2006, 08:10 AM
maybe i was just dreaming about the feedneck i was thinking about:rolleyes: ill probaly buy the CCM cuz im tired of having those stupid plastic ones break

crimsonguard
04-24-2006, 08:55 AM
I'm using a Lapco on my TLX. The feedneck is actually for an E99 but with a little modding, some longer screws, it fits pretty good. I have put almost every hopper into it, as well as an unsanded halo. Loaders will not come loose and turn around. It sits alittle higher than other feednecks but I got mine for $15cdn at a clearout.
The cam lever locking feednecks are much nicer. CCM, hybrid, NDZ, trinity all have excellent feednecks. My buddy just bought a hybrid for his promaster. Cost him $60cdn.(ouch) but it is the cats meow.... :D

druid
04-24-2006, 11:48 AM
I'd go with some kind of lever-lock as they are nicer to all hoppers

SnOoZ
04-28-2006, 03:07 PM
this is the one i was talking about i knew i wasnt tweaking out :crazy:
http://putfile.com/pic.php?pic=1/2317513916.jpg&s=x4
r those good 1's?

DRAGON
04-28-2006, 05:14 PM
Stay away from teh twist-loc type. They're bad juju -

Hob Hayward
04-28-2006, 05:56 PM
I just picked up an NDZ claming feedneck for my imagine today, and its great. I love it already, flip it open to take the hopper out, press it closed and the hopper is stuck that way. Plus its super low down.

SnOoZ
04-29-2006, 12:36 PM
do they make any CCM mid-rise feednecks becuz all i could find is the no-rise and i think that might bring my hopper to far down

DRAGON
04-29-2006, 04:44 PM
No they only make a low rise -

Hob Hayward
04-29-2006, 04:57 PM
Low rise should be fine shouldn't it?

DRAGON
04-29-2006, 06:59 PM
Low rises are perfect. The no pro they sell looks just a bit scarey to me. The cut of the portion that holds onto the neck of the hopper is half the size of normal. Granted you can cut the hopper feedneck down to the max and have the hopper practly laying on top of your marker but 1/2" holding onto the hopper neck seems a little less than desirable, to me anyways. I have a couple of CCM's on my markers and the no rises are perfect. It lowers the profile of the hopper and once it's clamped in, aint goin anywhere. No more broken plastic extensions -

electraballr
04-30-2006, 08:14 AM
look on www.doropaintball.com they have a few feeds that are pretty sick that iv never seen before