PDA

View Full Version : MORE imagine problems!


spyderimagine01
04-17-2006, 05:27 PM
As none of you know, I just recently moved to SW Virginia from NW Indiana, and i am having MORE gun problems. After having air flow problems, barrel threading and detent problems, and now my board is... doing odd things to say the least. I have tried millions of batteries, all paintball specific and my board wont work. Or atleast thats all i can figure. But, my imagine was also refurbished when I bought it. So should i just sell it on ebay and save or an ION or better? Or any help with my board?

fanersk
04-17-2006, 06:45 PM
what exactly is it doing/not doing?
from reading posts as far as i know(which isn't much) your board could be wet. or i read that if you use a regular 9volt it won't work and you need a 9.6volt. im not sure. but that is just what info i have drawn from reading posts. maybe some wire broke or something. from my little knowledge of circuit boards there could be a lot of different possiblilities.

druid
04-17-2006, 09:37 PM
look at the capacitor...the black cylinder on top of the board but below the noid...if there's a bulge out the end, it's fried. Get a new one at radio shack.
Make sure the noid is completely forward in the frame. Loosen the allen screws that hold it in place, push it forward with a flat-head screwdriver (like pry it) and reseat the set screws. Get a fresh 9.6V, 200mAh rechargable NiMh battery and charge it for 14-16 hours minimum.
Do that then get back to us...

spyderimagine01
04-19-2006, 05:02 PM
Still nothing... yes im using a 9.6 but good thinking

I've tried everything with it.

big_daddy_d
04-19-2006, 05:49 PM
may be time to invest in a t board...

ethan82000
04-19-2006, 06:13 PM
get a t-board
they truely are the only other way to go
they are awesome
Ethan

Hob Hayward
04-19-2006, 09:01 PM
Talk to kingman, see what they can do.

The Pink Panther
05-26-2006, 06:40 PM
just get a t board. there not that expensive.

pman15
05-26-2006, 07:22 PM
Talk to kingman, see what they can do.

ya kingman can help you out with any problem,just contact them