PDA

View Full Version : ACS Bolt


NextoN
04-11-2006, 11:36 AM
I play in paintball with my MR2 and when I fire my marker I have to recock it.This is about 1/200 shots but it's kind of enoying because there I stand 5 feet away from my enemy and I have to recock it. I think it is the acs bolt that stops a chop but do I have to recock it? Is this how the bolt works?

tex
04-11-2006, 02:21 PM
Did you break the acs bolt in??? You should not have to recock if it works.

NextoN
04-11-2006, 02:37 PM
Well I don't know 100% what you mean with breaking it but i have "warmed" up the spring in the bolt I took it out my marker and moved the spring up and down about 500-700 times.

If I stick my finger down the feedneck and when I fire with the airtank -on- i have to recock the marker I think this is what's happening.

Eric182
04-11-2006, 04:56 PM
Yeah, mine used to do that too, but it stopped doing it now, Kinda weird, I didn't do anything to it.

It still does it on full auto after about 5 shots though, but i never use full auto anyways so its all good.

NextoN
04-12-2006, 04:51 AM
Well that's right it only happens on full auto. Good think it's easy to walk the trigger on semi auto.. But in close rage it's not that easy..

NextoN
04-12-2006, 06:02 AM
Well I just fixed the problem. The problem was that the marker was'nt oiled. Now the acs works fine.. :)

tex
04-12-2006, 07:09 PM
Most excellent!!

new_Faction64
04-15-2006, 05:33 PM
Did you need to oil it when you first got it, or was it just getting dry?

NextoN
04-15-2006, 05:48 PM
It was oiled when i got the marker because the store oiled it for me. But it wasnt so much oil so it dryed out.

tex
04-16-2006, 07:18 AM
Just be careful to not over oil. That can cause major problems also.

Ares
04-16-2006, 10:01 AM
put 3 drops of oil in the ASA before every day of play and it should be fine