PDA

View Full Version : Spring question


badoingle
04-09-2006, 05:25 PM
Say I put in a heavy spring. I tune it at 275 FPS (going generalization haven't yet) would I be using more CO2 then the stock spring to fire the gun? and how bout the light one? Also how do I adjust the PSI my rodeo is operating at?



Thanks,
Badoingle

divvichild
04-09-2006, 08:20 PM
About the spring, im not quite sure, but i think that a stronger spring would take more CO2 than the stock. Weaker spring would do the opposite.

To adjust the psi on the rodeo with a stock reg, u use the allen wrench provided to turn the regulator screw, its the black one. taking it out more increases the psi which in decreases it.

badoingle
04-10-2006, 05:04 PM
okay. what PSI should I be operating at for most effecientcy? (sorry for the spelling) and I was wondering about that spring question...

divvichild
04-10-2006, 06:08 PM
as low as you can get it without compromising velocity.

try 700 psi with the spring all the way in. if its too high, turn the psi down.