PDA

View Full Version : Problems with my Special Edition!!!


tex
04-02-2006, 12:28 PM
I have an old spyder SE and for some reason I can't get the stupid thing to stop acting like the tank is out of air. I started by changing the hammer ring,then the bolt rings. After everything was said and done I wound up taring the whole gun apart changed every o-ring on the dumb thing and I even tried a different hammer. I tried different springs, a different bolt and of course a different tank. Could there possibly be something in the trigger? I had to change the trigger awhile ago, it's off of a TL but worked great for a couple of months. I'm out of ideas. If someone could please help.

ooglieboogliebob
04-02-2006, 12:35 PM
well ... check your striker and your sear .. see if they're rounded out .. cuz then that could be a problem ... Also have you tried shimming you noid yet ... if you did take it out ...

... tell me what happens after that ...

xNinja-Dolphinx
04-03-2006, 12:54 PM
Don't want top sound retarded but it happens....Make sure the tank IS full

tex
04-03-2006, 01:54 PM
Believe me I tried it with more than 1 tank and all the tanks worked on other guns, but I understand where you are coming from. Sometimes the most obvious is the answer.

NB_Hacker_NB
04-03-2006, 02:14 PM
Do those old things have regs? If so make sure it is turned up.

tex
04-03-2006, 06:35 PM
No reg on it. I think I got it fixed. Thanks for all the help.

ooglieboogliebob
04-03-2006, 06:55 PM
nope .. the se's didn't have regs

hah and your welcome .. :) :p