PDA

View Full Version : Help with an electric frame for a Victor!?


MonkeyWiz
04-02-2006, 04:18 AM
I was looking around and found none that was in my pricerange.
Cause I want no heavy bps I have no use of the ESP or such.
All I want is one pull - one ball action but with the sensitivety of a 50g electric trigger.

Is there such a frame out on the market and what would it cost me?
Thank you for your help.

shunut
04-02-2006, 06:05 AM
Not that I have ever heard of. Your best bet is to get a used ESP Frame with a 50g switch. You can still pull the trigger one time. Just because its an electronic frame doesn't mean you have to walk it and cap out the board. I have an Ego and it lets me pull the trigger one time and the electronics are far more advanced. You can try Otter's mechanical trigger mod (http://www.ottersccustoms.com/trigger.html) and see if that helps.

MonkeyWiz
04-02-2006, 06:46 AM
Not that I have ever heard of. Your best bet is to get a used ESP Frame with a 50g switch. You can still pull the trigger one time. Just because its an electronic frame doesn't mean you have to walk it and cap out the board. I have an Ego and it lets me pull the trigger one time and the electronics are far more advanced. You can try Otter's mechanical trigger mod (http://www.ottersccustoms.com/trigger.html) and see if that helps.
I did the Otter trigger mod and yes it made a heck of a difference.
I'm not sure it is enough though.

Is there anyone who can make me list of frames that could fit on a spyder?
I found some that might help me but I have no idea if they are any good.
And what I can see; none of them are very cheap either

* Kingman ESP IPI 3.0 frame
* Kingman ESP Reviews
* Kingman ESP IPI frame Reviews
* Kingman Sprint frame Reviews
* Mako Storm frame
* Boo-yaah LCD
* Centerflag Hyperframe
* Dragun frames

ooglieboogliebob
04-02-2006, 12:03 PM
... umm... go for the ipi's .. they're usually the cheapest ... but you'll have to look around for a deal around the 30's ...

Alex228
04-02-2006, 09:58 PM
Ok seriously MonkeyWiz me and you thin alike on spyders, at least on terms of upgrades. I also dont care about crazy shooting frames or nothing, I did 2 modificatons from Otters website, to make the trigger pull softer, and shortening the back, to do the front i need to drill and i dont have a drill press at the time. But yeah i also want a trigger frame that is alot softer. Oh and im new with this terminology. Whats ESP and 50g?

MonkeyWiz
04-03-2006, 06:40 AM
I created a blog about my upgrading and such.
http://thepaintballblog.blogspot.com/

I found a frame from ProToyz that will cost me around $60.

NB_Hacker_NB
04-03-2006, 03:31 PM
ESP is a type of electric trigger frame. 50 gram is an upgrade switch that makes it so you dont have to pull on the trigger as hard to squeeze a shot off.

ooglieboogliebob
04-03-2006, 07:53 PM
your probably gonna wanta do the magnet mod for the 50gram upgrade ...

ESP ... just a type .. like the IPI's and the CAMD's ... which you'll hear a lot when you try to buy one .. btw the camd's are better quality than the ipi's
esp also stands for especially ... ;)

MonkeyWiz
04-04-2006, 01:25 AM
I found a frame from ProToyz that will cost me around $60.
Pro Toyz is a brand: LINK (http://www.pbreview.com/products/reviews/3770/)