PDA

View Full Version : 2 fast?


pman15
03-25-2006, 12:31 PM
i once tried shooting very quickly but the gun kept coming uncocked. I think the 12 ounce i was using was pretty low but i am not sure. Can the spyder handle being shot so fast? is that why it keeps uncocking? oh one more thing i had it on semi when i was trying 2 shoot fast

ad0131065
03-25-2006, 01:14 PM
yes, it can be shot that fast, and if it is a pilot acs then the acs might have been uncocking the gun.

ppuma
03-25-2006, 02:04 PM
i once tried shooting very quickly but the gun kept coming uncocked. I think the 12 ounce i was using was pretty low but i am not sure. Can the spyder handle being shot so fast? is that why it keeps uncocking? oh one more thing i had it on semi when i was trying 2 shoot fast
Have you ever taking your gun apart? And when it was uncocking were you shooting paintballs? or reballs,v-balls etc. Cause I had the same problem with reballs and v-balls.

ooglieboogliebob
03-25-2006, 02:22 PM
actually .. if it's uncocking so many times .. it might of been because you were out of air ... see if you can push the pin in with ur fingers .. if you can the air's too low .. but you should take ur gun apart and clean it

pman15
03-25-2006, 05:50 PM
i was shooting zap paintballs

druid
03-25-2006, 06:14 PM
grease/oil/replace the striker O-ring...and use a filled tank...report back with the results

pman15
03-26-2006, 01:38 PM
it was just my 12 ounce didn't have enough co2 so i put in a full 20 ounce and works fine. so it was just my c02 tank. ya i tried it wit my 20 ounce and it shoot really quickly:)

spitfirocks
02-17-2007, 08:26 PM
its becuase one of two reasons

1. you acs bolt is doing its job, preventing the balls from choping

2. your co2 turned into liquid thus causing the chamber 2 freeze up


This thread is almost a year old, there is no reason to post in it. Please do not revive threads this old again.