PDA

View Full Version : Need help with this 2003 spyder xtra


Frias65
07-09-2012, 03:05 PM
Will all these parts work on it:


http://www.ansgear.com/Kingman_Spyder_Replacement_Striker_Main_Spring_p/kingmanspyderstrikermainspring.htm

http://www.ansgear.com/ProductDetails.asp?ProductCode=KINGMANBLASAKITHOSE RED&CartID=2


http://www.ansgear.com/RAP4_Spyder_Clamping_Feed_Neck_Tabs_Black_p/rap4spyderfntabs.htm


Gun: http://www.pbreview.com/products/reviews/641/

leed
07-10-2012, 04:55 PM
Everything should fit, except perhaps the bottom line. If you want to use the stock drop, it will not fit. If you want to use the stock Expansion chamber (and not the stock drop), it will fit, but you will have an awful lot of extra stainless steel hose. If you want to use neither, and fully replace it with this bottom line, it will fit just fine!

Frias65
07-10-2012, 10:56 PM
Everything should fit, except perhaps the bottom line. If you want to use the stock drop, it will not fit. If you want to use the stock Expansion chamber (and not the stock drop), it will fit, but you will have an awful lot of extra stainless steel hose. If you want to use neither, and fully replace it with this bottom line, it will fit just fine!
kk TY. I think im going to take off the drop forward since I don't really need 1.