PDA

View Full Version : Spyder MR100 Feedneck


Wolfrum
04-17-2012, 09:40 AM
Hi there everyone,

Does anyone (Kingman included) know what screw and nut combo they use for the MR100 Pro's feedneck?

Or, as an alternative an aftermarket feedneck that fits properly onto the MR100 Pro.

-Wolf

TheDarkShadow
04-17-2012, 10:37 AM
I'd contact kingman personally and find out (through customer service)

bigred76
04-17-2012, 10:50 AM
Take your feedneck off the marker and take it down to Home Depot, Lowes, or any other local hardware store that sells loose screws (or screws in baggies). Compare the screw to the hole and find one that'll fit, then a nut to match the threads that'll fit. I believe the stock size is metric, but there is almost always a standard equivalent.

If you call Kingman, the part number is SCR048. They simply refer to it as a "Feed Neck Clamp Screw & Nut" in the manual.

Wolfrum
04-17-2012, 12:55 PM
Thanks, I did send them an email as well in hopes their customer service or technical support can help. Though in the past the wait times to be answered can be a bit extreme.

Otherwise , I will go to a local HW store in hopes to finding something close, I just like keeping things original thats all.

-Wolf