PDA

View Full Version : I need help on Electronic trigger frames and upgrades!!


SonixSR
02-12-2012, 07:05 AM
OK. So im relatively new to the world of paintball. Ive been paintballing for half a year. I have a 09 Spyder Sonix. My only current upgrade is a Dye Xcel barrel. I have been wanting to make my gun Electric. I have found a Kingman e grip. I know it will fit...but is tjere anything cheaper or better?. Any suggestions??? Please help!! And besides eyes what would go good with a e grip.
PS My Sonix is NOT the Spyder Sonix Pro its just an 09 mech.
PSS i found this on ebay.. dont know how it is.. http://compare.ebay.com/like/380403774944 please give me feedback on this<<<<

TheDarkShadow
02-12-2012, 04:09 PM
I've never seen a frame like that before. if you buy a new frame, make sure its the newest design. older ones will fit but often the battery that comes with them may not hold charge due to being old. Also, on the older frames the asa mounting style is different; 09 and newer spyders have the inline mounted asas while the 05 and older ones have a staggered mounted asas

SonixSR
02-12-2012, 04:37 PM
Ok, i was thinking about this one> http://www.ansgear.com/ProductDetails.asp?ProductCode=KINGMANETRIGGERFRAM E&CartID=1

Im not sure if i could put a new board in it because it has a selector switch and not an LED/CAMD. Which i was hoping to get. Does anyone know where i could get a LED/CAMD trigger frame? besides firstcallpaintball? I was also hoping on a rocking trigger frame...Sorry for being picky its just that i want it to be worth it :)

SonixSR
02-12-2012, 04:38 PM
@TheDarkShadow I really like you gun! Where did u get your e frame????

TheDarkShadow
02-12-2012, 05:32 PM
the eframe from ansgear is the one I would get if i were you, it should bolt directly up to your 09 sonix. I got my eframe from firstcallpaintball about 3 years ago and I bought the aftermarket dye grips. The CAMD/LED/rocking trigger frame will need an asa adapter or an older style asa to work. Finding them online new can be difficult, especially the rocking trigger frame, you may have to look for them used. also some fields may not allow the rocking trigger frame.

SonixSR
02-12-2012, 05:47 PM
Okay, would it be hard to make my trigger like the one you have..if i bought one?
BTW i really appreciate the help.

TheDarkShadow
02-12-2012, 06:54 PM
the trigger on mine is just the stock CAMD trigger. I dont think they make any aftermarket triggers for the new frame (well I havent seen any anyway) so you'd probably be stuck with the one that it comes with

SonixSR
02-12-2012, 07:10 PM
Okay thank you!