PDA

View Full Version : Trilogy Valve Stem Help


rayray88
07-03-2011, 07:41 PM
So I'm currently wanting to do the spyder pump conversion. I order a Trilogy valve stem as per the advice given in a lot of tutorials. However, I just got it in a couple days ago and I finally had time to disassemble a marker today. I looked at the valve, then looked at the Trilogy valve stem then back at the valve again. I thought to myself the Trilogy valve stem seemed too small. So I stuck it in and sure enough it was too skinny. The point of the Trilogy valve stem is to disable the blowback, right? Surely air would get past here. I took pics to show you guys. I bought the part from here (http://www.jtpaintballparts.com/ProductDetails.asp?ProductCode=GP1323&Show=TechSpecs) Did I receive the wrong part? Or has the part changed?
The original valve and stem
http://i113.photobucket.com/albums/n235/rayraychach/Forums%20Pics/IMG_0329.jpg
The Trilogy valve stem and Spyder valve
http://i113.photobucket.com/albums/n235/rayraychach/Forums%20Pics/IMG_0330.jpg