PDA

View Full Version : Finding parts.


the_fen
02-18-2011, 01:29 PM
I have a Spyder Victor i need this part, it leaks. I tried to fix it with new o-ring, teflon and sealant, maybe i should weld it??? lol.
http://img41.imageshack.us/img41/3416/zzzma.jpg (http://img41.imageshack.us/i/zzzma.jpg/)

I think it is BS that there is no website to buy parts like this from!!!! You can only find sites with a few parts(most are upgrade parts), but not all of them for replacing. This gun works great except a lil leak, so I have to throw it away, just because of this? I think thats what the gun makers want us to do, so they can keep making $ with selling new guns, while we fill in the landfills!!! BS!!!!

DFSniper
02-18-2011, 03:19 PM
check BST on here. but more importantly, check the threads for any chips.

blue loctite should also work.

the_fen
02-18-2011, 03:57 PM
Bst????

DFSniper
02-18-2011, 04:27 PM
http://spyder.tv/forums/forumdisplay.php?f=45

Buy/Sell/Trade

vaipulu
03-02-2011, 09:49 AM
Easy killer, welding on aluminum is not for the faint of heart. Second, craigslist and pawn shops sell these markers for almost nothing, I saw a victor here for 22$ I.E. Parts. As stated blue lock-tight will most likely fix your situation.

SundragonPPS
03-03-2011, 10:23 AM
Take a look at your photo and mine

http://i260.photobucket.com/albums/ii23/SunnyD-SPPS/LPCVA.jpg

You might look at yours and say, "What's wrong with this picture?"

The LPC is not screwed in all the way(in your pic) so yes, it is going to leak. You can still see the threads through the glob of teflon tape. The threads should be well into the LPC(look at my photo), not hanging outside of it. This is a simple fix, not complicated at all. Change the oring on the LPC, screw it in all the way and it will seal. Kingman has no hidden agenda set up so you'll throw away your old marker to buy a new one. There are plenty of places to get Spyder parts if you just look around. Those answering your questions have no idea where to get new Spyder parts.