View Full Version : Spyder Rodeo Stock regulator help...

02-04-2011, 11:00 PM
Does anyone know to to take it apart? Mine is leaking out of the adjustment screw and I can't rebuild it because I don't know how to take it apart. Thanks!

02-05-2011, 10:53 AM
Pics of said reg? Do you have a manual? That's normally the way most people know ahead of time how to tech things and what parts are involved with the assembly -

03-02-2011, 09:41 AM
Remove bottom hose from ASA

Two small brass screws using the RIGHT size allen key ( I find these to be very fragile) remove all the way

Pull reg from block being careful not to damage O-ring pull straight out.

On the stainless part ( not anodized ) using an adjustable wrench and a table cloth ( so you dont scratch it) twist the top portion of your regulator off.

looking in from the threaded end, you will see a brass disc. Very gently tap the knurled end to basically shake this brass disc out. Its T shaped and also fragile. Remove and carefully inspect the O-ring. Use the right one and replace, should fix your problem, if not post back for a further break down.