09 Spyder Sonix w/ e trigger

[dsj]

Hi all, first post but I've searched a whole bunch...

I have an 09 Sonix and recently bought a refurbished Imagine to swap the E trigger.

The trigger works fine but when you pull back the bolt on the Sonix the E trigger won't release it. Battery is fully charged, can't seem to figure it out. Is there a compatibility issue? If there's an easy fix like changing the sear, etc. please let me know!

Thanks.

[DFSniper]

swap out the striker too

[dsj]

Any specific striker? Will this fix the problem? Can't seem to find replacement sears anywhere...

[druid]

are your frame screws too tight or loose? What about the grip panels? I had an ESP frame that the panels bound on the clapper of the noid...I had to mill them out a little with the Dremel.

[dsj]

I tried the frame screws loose, tight and snug. No dice.

I also tried it with the factory grips, grips off and DYE sticky grips. No dice.

[TheDarkShadow]

swap the sonix stiker with the imagine striker. you may be able to adjust the solonoid to adjust the height of the sear, or file the sear down if it comes down to it. (btw does it work on the imagine?)