PDA

View Full Version : Spyder Imagine LED Trigger


hqh29
05-14-2010, 09:49 AM
I was given an Imagine, but it seems the board is dead. It doesnt charge, it doesnt turn on with a new battery. Nothing! So I am looking for a trigger with the board. Nothing too crazy, just looking to get this gun running for a loaner gun. thanks.

oldironmudder
05-15-2010, 03:39 AM
Is it the board with 3 LEDs? If so I have one along with complete frame & alot of other Spyder parts I will let go at a good price.

hqh29
05-15-2010, 06:48 PM
Is it the board with 3 LEDs? If so I have one along with complete frame & alot of other Spyder parts I will let go at a good price.

this is the board thats currently in it (pic below) I'm assuming the board is dead, it will not turn on with a new 9v nor will it charge when i plug it in to a charger. I just found a replacement board for a pilot/imagine on ebay for $15, I will give that a shot first. How much will you sell the complete trigger and frame? and does it still work good? thanks.

http://i1023.photobucket.com/albums/af360/jrhernandez29/spyderimagine.jpg

DRAGON
05-15-2010, 08:44 PM
Please, it's a trigger frame, not a trigger. The trigger is what you pull on. A trigger frame is the whole apparatus - ;)

Sounds like you only need the board, not the whole frame unless the prob is the on/off switch. I believe this is what you're looking for (http://firstcallpaintball.com/c-10523-boardharnesses.aspx).....yes? The geenyuses at FC have the wrong pics posted for the wrong boards. The LED board pic shows the CAMD and CAMD pic the LED. It appears they still have your LED in stock. At that price you might consider 2 of them -

hqh29
05-16-2010, 09:24 AM
Please, it's a trigger frame, not a trigger. The trigger is what you pull on. A trigger frame is the whole apparatus - ;)

Sounds like you only need the board, not the whole frame unless the prob is the on/off switch. I believe this is what you're looking for (http://firstcallpaintball.com/c-10523-boardharnesses.aspx).....yes? The geenyuses at FC have the wrong pics posted for the wrong boards. The LED board pic shows the CAMD and CAMD pic the LED. It appears they still have your LED in stock. At that price you might consider 2 of them -

If it is an off switch where can I pick one up? Will this board work for mine? CAMD Board (http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=300418202296&ssPageName=STRK:MEWNX:IT) its the onlything I found before I found this site.

shunut
05-16-2010, 09:48 AM
You may be able to pick up an on/off switch at radio shack. Other wise you'll have to find one online.

hqh29
05-20-2010, 03:13 PM
You may be able to pick up an on/off switch at radio shack. Other wise you'll have to find one online.

So I got the new board, didnt work, still no power! Any ideas? does anyone have a mechanical trigger frame I can slap on this thing and just get it over with?

hqh29
05-20-2010, 09:51 PM
So I got the new board, didnt work, still no power! Any ideas? does anyone have a mechanical trigger frame I can slap on this thing and just get it over with?

I figured out I need an ON/OFF switch, the board lights up if i tough the green wire to the middle one. If I hold it the trigger works perfectly. It wont do anything if i leave the green wire attached to its position. What I noticed is that the safety doesn't work, it will still fire. SO please let me know where I can find a switch, I already searched Radio Shack and Fry's, no luck.... thanks!

shunut
05-21-2010, 05:00 AM
If you couldn't find one at Radio Shack or Fry's Electronics, I'm not sure where you'll find one. Try calling Kingman, they may be able to help out.