View Full Version : Spyder vs3 will not shoot co2

04-03-2010, 02:58 PM
I recently dusted off my gun after awhile and charged it up. went and got the co2 tank filled. When i hook it up and turn the gun on the co2 will turn on and the gun will click, But no co2 will shoot. Any suggestions?

04-03-2010, 04:43 PM
Ok. So i got the balls to fire...but now the issue is that its shooting out like 6 at a time on semi auto. and then co2 sprays out of where the cocking bolt is. Any help on that issue? I think it has something to do with the pressure but not sure how far to turn it.

04-03-2010, 06:31 PM
By any chance did you at least drop some oil in the ASA? If not, save yourself a few headaches & strip the marker down, check & oil your orings. Reassemble & test it. If it dry fires good, drop some paint in it. Also what mode is the board in?

08-06-2010, 10:04 PM
The vs3 isn't meant to fire with c02 FWIW.

08-07-2010, 05:20 AM
The vs3 isn't meant to fire with c02 FWIW.

Silly noob, I've been using a VS2 for almost 4 years with Co2. If you know what lube to use on the orings you will never have issues.