PDA

View Full Version : air leak..


bgaris0503
02-22-2010, 05:52 PM
my mr1 is leakings somewhere on the inside of the gun, it does it whether the gun is cocked or not. It isnt a large volume of air that is leaking out, but its enough..any ideas??

xsvly-fat
02-22-2010, 06:18 PM
Is it coming down the barrel? Or just inside?

bgaris0503
02-22-2010, 06:27 PM
inside the gun, like i checked the cup seal and it was fine, the gun is literally brand new, like i havent fired it yet...

xsvly-fat
02-22-2010, 08:16 PM
On my Timmy it would be the farthest ram o-ring from the barrel. I'm not sure about on the MR1. I'd change that o-ring first and if that doesn't work post here and I'll try remember what it is ha.

Griff
02-22-2010, 08:28 PM
Add 2-3 drops of oil to the ASA and put your tank back on. With the Barrel removed dry fire a few times. USe a rag to cover were the barrel goes. Marker will through a light amount of oil with each triger pull.

bigred76
02-22-2010, 11:42 PM
Also remove your hopper for the above method and keep your eyes away from the feedneck just in case some oil decides to take that route.

slim and shady
02-23-2010, 06:56 AM
deffinatly try to oil it first, then look into changing rings etc.

bgaris0503
02-25-2010, 01:16 PM
ok thanks ill let you know what happens..