PDA

View Full Version : E trigger swap


05XXTRAA
02-15-2010, 06:36 AM
I just bought an etrigger gun and someone told me that i should by an etrigger and put it on my extra the trigger is on an imagine is it possible to swap if it is how

DFSniper
02-15-2010, 07:39 AM
take off screws, swap frames, replace screws.

05XXTRAA
02-15-2010, 07:40 AM
thank you very much

DFSniper
02-15-2010, 08:13 AM
np. it might not be a bad idea swapping your strikers out too.

05XXTRAA
02-15-2010, 08:46 AM
the strikers are sit right underneath the bolt right? because when i put the e trigger up to the xtra it wouldnt shoot and i think it has something to do with that

05XXTRAA
02-15-2010, 10:02 AM
Ok so i got it all together and when i pull the bolt back and try to fire it without co2 it wont fire will it act differently with co2

05XXTRAA
02-15-2010, 10:56 AM
http://s997.photobucket.com/albums/af93/PB05SpYdEr/

05XXTRAA
02-16-2010, 05:27 PM
im haveing trouble with the gun now when i pull the bolt back and fire the gun it wont release the bolt and when i pull the trigger all the lights go off but it keeps clicking i noticed a small round silver piece fell out of the gunis this the problem?

slim and shady
02-16-2010, 05:31 PM
well if its supposed to be in the gun and its not, that probably isnt helping may help if we knew what peice you were talking about. Also make sure you are using a 9.6volt battery and that its fully charged.

05XXTRAA
02-17-2010, 11:45 AM
the diameter is about 7/16
http://s997.photobucket.com/albums/af93/PB05SpYdEr/?action=view&current=030-1.jpg

05XXTRAA
02-17-2010, 12:59 PM
i changed the battery as suggested it works perfectly but im still not sure where the little round piece goes

slim and shady
02-17-2010, 04:32 PM
that looks like the little peice that goes behind the shim and infront of the velocity screw. Why would you have that out to change the trigger frame?

05XXTRAA
02-18-2010, 04:15 PM
i also had the grip cover off to change the battery like i said i have no idea where it came from

slim and shady
02-18-2010, 05:16 PM
I told you where it came from.

05XXTRAA
03-29-2010, 07:06 PM
would a "Low Blow" delrin bolt from alamo city paintball help prevent ball chops http://www.alamocitypb.com/MANUFACTPAGES/Kingman.htm