View Full Version : problem with solenoid
02-13-2010, 08:01 AM
my solenoid has been acting up .. not always working and only going halfway
any help please!
02-13-2010, 09:34 AM
make sure your battery is charged?
02-13-2010, 01:22 PM
and make sure there's no debris between the pancake, copper washer and the noid body.
Also...it's possible the noid itself shifted inside the pocket of the frame. There are 2 or 4 grub screws holding it in place. reposition the noid and reset the screws.
slim and shady
02-13-2010, 08:13 PM
you could shim it aswell.
02-13-2010, 11:16 PM
Check the wires at the solder joint. I had one years ago that acted up & it ended up being at that joint.
04-17-2010, 05:54 PM
mine was doing the same thing, after trying all the suggestions and shimming slim shady suggested i relace the capacitor, got a few from a google search for abour 4 bucks and fixed the problem completly