PDA

View Full Version : New Mr2 Mod


paintballer321
12-20-2009, 08:16 AM
If u take out the trigger of the trigger frame and u take out the trigger spring and put the trigger back if the frame and put the frame back on the gun and try it out is it alot more lighter trigger feel

slim and shady
12-20-2009, 08:40 AM
there would be nothing to reset your trigger so it would just be flopping back and forth hitting the micro switch and shooting the marker. Not a good thing to try.

paintballer321
12-20-2009, 09:24 AM
it works on my gun

slim and shady
12-20-2009, 10:05 AM
what spring are you talking about? I have heard of people clipping the spring or putting in a lighter one but with no spring what pushes your trigger back after you pull it?

oldironmudder
12-20-2009, 11:55 AM
Back when I had an ESP frame on my TL+, I took out the trigger return spring. Then I went to Rat Shack & bought another micro switch that had a roller lever on it. I opened up the switch, bent the internal tabs so there was barely any movement to the paddle. Then I bent the lever so the roller was touching the trigger & acted like a rear stop. I loved it & the switch & trigger were the only parts of my first few ESP frames I kept.